Re: Bridging 2 tagged vlans together
Bart De Schuymer <[email protected]>
| Newsgroups | gmane.linux.network.bridge.ebtables.user |
|---|---|
| Message-ID | <[email protected]> |
Op di, 13-09-2005 te 00:44 -0700, schreef Tim Flowers:
> of course I did that :) sorry I forgot it in the email.
>
> What I would expect from the setup that I previously posted would be
> that traffic from vlan 11 and 10 is bridged so that I can filter with
> ebtables/iptables My test lab looks like this:
>
> 10.1.10.1 ---<VLAN 10> -- [ETH0.10]{brhost}[ETH1.11] ---
> <VLAN11>---10.1.10.2
>
> i've tryed both a cisco catalyst and a foundry switch to present the
> tagged vlans just to rule out a problem with one of the switches.
>
> I currently don't get arp or anything through the bridge.
Are you sure the packets are tagged correctly? Try using eth0 and eth1
as bridge ports to see the difference.
cheers,
Bart
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf