Re: Problem recognizing card

Mayank Sharma wrote:
> Hi all,
>     I am facing a small problem with recognizing a serial card. The card 
> is NTT DoCoMo P-in-Comp@act flash card. I added the manfid in the config 
> file, and it is able to recognize that it is a serial card. but when i 
> do cardctl status, i get the following message.
>        Socket 0:
>          3.3V 16-bit PC Card
>          function 0: [busy], [bat dead], [bat low]
>   I get the above message on my linux machine. We have a custom board, a 
> clone of ipaq with pcmcia interface, and it has linux running on it 
> (from handhelds). On that board when  i insert the card, the system 
> hangs, and does not respond to any events. Only after removing the card 
> the board comes out of it's hang state. I am not sure what is happening. 
> If anyone can give me clues on how to get it to work/ get more debug 
> messages to know what is going wrong, it will be of great help.
> 

I get something similar with a dead Linksys WiFi CF Card (WCF12).  Time 
to get the warranty...





-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! 
Get cracking and register here for some mind boggling fun and 
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en