Re: Problem recognizing card

Hi Dave

>So... I take it that this "linux machine" is not the one with the
>problem?  The card works fine on this system?
>
I am not sure 'cause i really can't use the card. it's PHS modem card 
and can be used only in japan, and i am in India. but it gets a terminal 
/dev/ttyS2. But in the status it shows [busy]

>Are other compact flash cards working on this system?  Do you get any
>useful information in your system log when the system wakes back up?
>
other serial cards (even a PHS by a different manufacturer) works fine. 
only this particular card was having problem. I get the following 
message when i insert the card in /var/log/message
cs: socket c1ea2000 timed out during reset.  Try increasing setup_delay
when i do cardctl status i get the following message
Socket 1:
  3.3V 16-bit PC Card
  function 0: [busy]

and when i do cardctl ident, it hangs untill i plug out the card. Can 
you tell me how to get more log messages, i'll compile the driver 
accordingly and get more messages

Rgds,
Mayank





-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! 
Get cracking and register here for some mind boggling fun and 
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en