Re: TI1425 not recognizing any card properly

On Tue, May 20, 2003 at 03:24:01PM +0200, Andreas Pfaffeneder - SCM PC-CARD GmbH wrote:
> 
> I got a problem gettig a PCMCIA-Adpater with a TI 1420 to work at all:  
...
> This works fine if I use an adapter with a TI1410-bridge (or some other
> we got here), cards are detected properly and just work.
> 
> With the above mentioned TI1425 I only get socket timeouts and it looks
> like the CIS can not be accessed but can not imagine where this is
> resulting from. Cardctl status shows two sockets.
> 
> I also tried to get it work with 2.4.20 + -ac2 and the latest pcmcia-cs
> 3.2.4.
> 
> If somebody might have a look at this:
> 
> Dmesg: <http://www.scm-pc-card.de/service/linux/dmesg.txt>
> config.opts: <http://www.scm-pc-card.de/service/linux/config.opts>
> lspci.txt: <http://www.scm-pc-card.de/service/linux/lspci.txt>
> messages.txt: <http://www.scm-pc-card.de/service/linux/messages.txt>

I could not access lspci.txt here?

-- Dave


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge