Re: SOLVED:Correct configuration for compaq 2100(900?)

i commented out the resource settings for io ports and
memory, and get this error in dmesg
Intel ISA/PCI/CardBus PCIC probe:
  O2Micro OZ6912 rev 00 PCI-to-CardBus at slot 00:0a,
mem 0x80000000
    host opts [0]: [pci/way] [pci irq 11] [lat 32/32]
[bus 2/5]
    ISA irqs (default) = 4,7,10 PCI status changes
cs: warning: no high memory space available!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
cs: unable to map card memory!
memory_cs: RequestWindow: Resource in use



--- David Hinds <[email protected]> wrote:
> On Tue, Jul 08, 2003 at 09:36:30PM -0700, Mr.
> Mailing List wrote:
> > from /etc/pcmcia/config.opts
> 
> ...
> 
> If you are curious, it is probable that there is
> just one bit of this
> that is actually important, and now that you have a
> setup that works,
> you can try undoing some of the changes to see what
> actually matters.
> 
> You can probably restore all the memory resources to
> their defaults.
> It is likely that either one interrupt, or part of
> one IO range, is at
> fault.
> 
> -- Dave


__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com


-------------------------------------------------------
This SF.Net email sponsored by: Parasoft
Error proof Web apps, automate testing & more.
Download & eval WebKing and get a free book.
www.parasoft.com/bulletproofapps