Re: pcmcia problems with 2.6.0test11

On Thu, Nov 27, 2003 at 04:46:49AM -0500, mrmailer wrote:
> 
> I have pcmcia working with my wpc11 card on 2.6.0test9(stock fc1
> install, all I did was put PCIC=yenta-socket in
> /etc/sysconfig/pcmcia), but even though it ran pcmcia on start, and
> even if i tried starting it afterwards by /etc/rc.d/init.d/pcmcia
> start, it said no sockets found till I manually modprobe
> yenta-socket.
>
> anyone know how to automate it again?

This is not a complete problem report.  You need to also indicate:

- what brand and model of laptop this is
- show all relevant system log messages
- show 'lspci -v' output

If you are having problems with the startup script, at the very least,
you should show the actual output and system log messages you get when
you run the script.

-- Dave


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/