Re: "timed out during reset" with calluna ATA HDD

David Hinds wrote:
 > On Wed, Jan 29, 2003 at 09:54:25AM +0100, Steven Scholz wrote:
 >
 >>David Hinds schrieb:
 >>
 >>>On Tue, Jan 28, 2003 at 02:31:56PM +0100, Steven Scholz wrote:
 >>>
 >>>
 >>>>One particular model of calluna ATA HDD is making trouble! It's the 650MB,
 >>>>Especialy after power on when the card was already inserted, I get
 >>>>
 >>>>cs: socket c0f7e800 timed out during reset.  Try increasing setup_delay.
 >>>>
 >>>>Usually "cardctl eject" followed by a reboot works.
 >>>
 >>>How about just "cardctl eject" followed by "cardctl insert"?
 >>
 >>Nope. Does not work. (well maybe one in a million)
 >
 > Well, that's completely bizarre, and I can't come up with a theory
 > that makes any sense at all.  I think you'll have to take it up with
 > someone who knows more about this platform, because it seems like some
 > sort of weird interaction between the bridge device and the socket
 > driver.

Ehm... David,

"cardctl eject" followed by "cardctl insert" works.

"cardctl ident" works although "cs: socket c0f7e800 timed out during reset.  Try 
increasing setup_delay."

Just rebooting works.
"cardctl eject" followed by a reboot works.

So I suppose that the things done while "shutting down socket 0" produce some 
... ehm ... magic...

Any ideas?

Steven




-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com