Re: "timed out during reset" with calluna ATA HDD

I wrote:
> 
> 
> David Hinds wrote:
>  > On Wed, Jan 29, 2003 at 09:54:25AM +0100, Steven Scholz wrote:
>  >
>  >>David Hinds schrieb:
>  >>
>  >>>On Tue, Jan 28, 2003 at 02:31:56PM +0100, Steven Scholz wrote:
>  >>>
>  >>>
>  >>>>One particular model of calluna ATA HDD is making trouble! It's the 
> 650MB,
>  >>>>Especialy after power on when the card was already inserted, I get
>  >>>>
>  >>>>cs: socket c0f7e800 timed out during reset.  Try increasing 
> setup_delay.
>  >>>>
>  >>>>Usually "cardctl eject" followed by a reboot works.
>  >>>
>  >>>How about just "cardctl eject" followed by "cardctl insert"?
>  >>
>  >>Nope. Does not work. (well maybe one in a million)
>  >
>  > Well, that's completely bizarre, and I can't come up with a theory
>  > that makes any sense at all.  I think you'll have to take it up with
>  > someone who knows more about this platform, because it seems like some
>  > sort of weird interaction between the bridge device and the socket
>  > driver.
> 
> Ehm... David,
> 
> "cardctl eject" followed by "cardctl insert" works.
> 
> "cardctl ident" works although "cs: socket c0f7e800 timed out during 
> reset.  Try increasing setup_delay."
> 
> Just rebooting works.
> "cardctl eject" followed by a reboot works.
> 
> So I suppose that the things done while "shutting down socket 0" produce 
> some ... ehm ... magic...

Just killing cardmgr and start it again does _not_ work!

Steven





-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com