Re: Building a SD card adapter
Shaun Jackman <[email protected]>
| Newsgroups | gmane.linux.ports.game-cube.devel |
|---|---|
| Message-ID | <[email protected]> |
On Apr 9, 2005 3:15 AM, Rob Reilink <[email protected]> wrote: > Hi Shaun, > > Also you should make sure the contact is ok. I had to insert a 1mm > plastic strip under the pcb to get the correct height, just like the > plastic cover of a 'real' mem card does. > > Regards, Rob My SD card adapter works! It turns out you were right on the money here, Rob. The PCB was oh-so-slightly warped, so that one of the GameCube pins, one of the sense pins, wasn't making contact. I put a shim of electrical tape under it, and it worked! Thanks for all your help! Cheers, Shaun ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click