DNS not working YDL 4.0

Hello:

I've been at MOL often over the last 18 months. After much forum surfing
and google/technorati/yahoo'ing, I've got OS 10.3.9 running in MOL.

I'm close.

2 issues:

1.  After a small fix in /etc/mol/molrc.net I can now ping my isp's DNS
servers as well as various address for which I know the actual numeric
IP e.g. 68.168.96.162 (adelphia.net DNS server).  However, I can't get
returns from ping, whois, traceroute etc,... with text names e.g.
yahoo.com, adelphia.net.

2.  When I try to switch back to YDL 4.0, the window server often
crashes, making it difficult to debug.  I suspect from the output and
occasional MOL warning applet about "unsupported screen resolution" that
I just need to rerun molvconfig and confine my settings to "known good"
resolutions.

Here is the output from the last session:
        
        [root@localhost root]# startmol -X
        Mac-on-Linux 0.9.71-pre1 [Aug 27 2004 16:38]
        Copyright (C) 1997-2004 Samuel Rydh
        Starting MOL session 1
        Loading Mac-on-Linux kernel module:
           /usr/lib/mol/0.9.71/modules/2.6.8-1.ydl.7/mol.ko
        Running in PowerPC 7400 mode, 384 MB RAM
        Timebase: 18.43 MHz, Bus: 73.72 MHz, Clock: 1066 MHz
        Using USB mouse on /dev/input/mice
        OHCI USB controller registered
        Xlib: connection to ":0.0" refused by server
        Xlib: No protocol specified
        
        Could not connect to X server :0
        Fullscreen video on VT 8.
        Could not open '/var/lib/mol/console.kbd'
        Video driver(s): [console_video]
        
             640* 480, depth 8,15,32   { 59.9, 72.1, 74.9, 89.9, 99.7 }
        Hz
             800* 600, depth 8,15,32   { 56.2, 60.3, 70.0, 72.1, 74.9,
        89.9, 96.3, 99.9 } Hz
            1024* 768, depth 8,15,32   { 0.0, 60.0, 70.0, 72.2, 75.0,
        75.0, 86.9, 90.2 } Hz
        
        Autoswitching to console
        DHCP nameserver exported: 68.168.96.162
        Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
        
            ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
            broadcast: 192.168.41.255  nameserver: 192.168.41.1
        
        OSS sound driver
        
            CD    /dev/cdrom       CD/DVD         <read-only>   ------
            Unembedded HFS+ /dev/hda3                       <rw> 5179 MB
        
        SCSI devices:
        
            SCSI  /dev/cdrom       [CDROM/DVD driver]
        
        
        >> ==================================================
        >> MacOS X Boot Loader 0.9.70
        >> Candidate boot volume: /mol-blk@0/disk@0:0
        >> /mol-blk@0/disk@0:0,\mach_kernel (3872560 bytes)
        >> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
        >> ==================================================
        
        <*> MOL acceleration for 10.3
        <*> Block Driver v1.1
        <*> SCSI driver v1.03
        <*> Ethernet driver 1.1
        <*> MolAudio 1.2
        + Video Driver v1.12
        <*> MolEnet: Link up at 100 Mbps - Full Duplex
        DHCP lease: 192.168.41.2
        Signal INT
        One more to kill emulator
        Signal INT
        One more to kill emulator
        Signal INT
        One more to kill emulator
        Signal INT
        One more to kill emulator
        cleaning up...
        
uname: 2.6.8-1.ydl.7

Any suggestions would be greatly appreciated. I've come a LONG way to
this point and I will be very happy when I get networking running.

John Gonter
http://garden.org
http://fixedimpressions.com

A make it happen guy