[PATCH 2/2] irqchip: clocksource: fix jcore-pit irq request

Artur Rojek <[email protected]>
Newsgroups gmane.linux.kernel,gmane.linux.ports.sh.devel
Message-ID <[email protected]>
The jcore-aic irqchip does not have separate interrupt numbers reserved
for cpu-local vs global interrupts. Instead, the task of selecting this
property is being delegated to the device drivers requesting the given
irq.

This quirk has not been taken into account while migrating jcore-pit to
request_percpu_irq(), resulting in a failure to register PIT interrupts.

Fix this behavior by making the following changes:
1) Explicitly register irq_set_percpu_devid() in jcore-pit.
2) Provide enable_percpu_irq()/disable_percpu_irq() calls in jcore-pit.
3) Make jcore-aic pass the correct per-cpu cookie to the irq handler by
   using handle_percpu_devid_irq() instead of handle_percpu_irq().

Fixes: 69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")

Signed-off-by: Artur Rojek <[email protected]>
---
 drivers/clocksource/jcore-pit.c | 15 ++++++++++++++-
 drivers/irqchip/irq-jcore-aic.c |  2 +-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/jcore-pit.c b/drivers/clocksource/jcore-pit.c
index a3fe98cd3838..82815428f8f9 100644
--- a/drivers/clocksource/jcore-pit.c
+++ b/drivers/clocksource/jcore-pit.c
@@ -114,6 +114,18 @@ static int jcore_pit_local_init(unsigned cpu)
 	pit->periodic_delta = DIV_ROUND_CLOSEST(NSEC_PER_SEC, HZ * buspd);
 
 	clockevents_config_and_register(&pit->ced, freq, 1, ULONG_MAX);
+	enable_percpu_irq(pit->ced.irq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int jcore_pit_local_teardown(unsigned cpu)
+{
+	struct jcore_pit *pit = this_cpu_ptr(jcore_pit_percpu);
+
+	pr_info("Local J-Core PIT teardown on cpu %u\n", cpu);
+
+	disable_percpu_irq(pit->ced.irq);
 
 	return 0;
 }
@@ -168,6 +180,7 @@ static int __init jcore_pit_init(struct device_node *node)
 		return -ENOMEM;
 	}
 
+	irq_set_percpu_devid(pit_irq);
 	err = request_percpu_irq(pit_irq, jcore_timer_interrupt,
 				 "jcore_pit", jcore_pit_percpu);
 	if (err) {
@@ -237,7 +250,7 @@ static int __init jcore_pit_init(struct device_node *node)
 
 	cpuhp_setup_state(CPUHP_AP_JCORE_TIMER_STARTING,
 			  "clockevents/jcore:starting",
-			  jcore_pit_local_init, NULL);
+			  jcore_pit_local_init, jcore_pit_local_teardown);
 
 	return 0;
 }
diff --git a/drivers/irqchip/irq-jcore-aic.c b/drivers/irqchip/irq-jcore-aic.c
index b9dcc8e78c75..1f613eb7b7f0 100644
--- a/drivers/irqchip/irq-jcore-aic.c
+++ b/drivers/irqchip/irq-jcore-aic.c
@@ -38,7 +38,7 @@ static struct irq_chip jcore_aic;
 static void handle_jcore_irq(struct irq_desc *desc)
 {
 	if (irqd_is_per_cpu(irq_desc_get_irq_data(desc)))
-		handle_percpu_irq(desc);
+		handle_percpu_devid_irq(desc);
 	else
 		handle_simple_irq(desc);
 }
-- 
2.48.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.