Remote Configuration

I typed in:
# tftp 198.113.47.3
# get /TFTP/default.conf

and it read the file. so it will see it if I type it in but will not
load it on its own. So the line of sight seems ok. Anything else that I
can try so that it loads the default.conf ????
Because even though it seems to read the file by typing in the command
manually, since the client is already configured, it doesn't make any
changes.






From: Diego Torres Milano <diego@in...> 
 Re: Remote Configuration   
2003-11-04 11:37  
 Get a login session in the thin client a try the tftp command from
there.
 Do something like this:
 # tftp novell
 > get /TFTP/default.conf
 > quit
 #
 
 > Problems with Remote Configuration.
 > I am using a Novell Netware DHCP server and also using the Novell
Server
 > for TFTP. It works great for sending down the NBI file but it doesn't
 > read the default.conf
 >
 > In the pxes config, I Enabled Remote Configuration.
 > for the Server I typed in: 198.113.47.3 (IP of Novell Server that I
use
 > for TFTP)
 > for the Directory, I typed in: \TFTP (This is the directory on my
Novell
 > Server that downloads the NBI file)
 >
 > For some reason the default.conf does not load. Any ideas???
 >
 > Thanks!
 >
 >
 >

 



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/