Re: HELP: Kernel panic

Have you rebuilded the lilo? checking the img file and the config of 
kernel to see if the kernel can get the image file.

wish it can help you

Tom

Yinsheng Li wrote:

> Hello,
>
> I have a problem after I upgrade the kernel. While I try to boot from 
> the new updated kernel, I got an error -- "Kernel panic. No init 
> found, try init = option to kernel"
>
>
> What should I do now? I can still use old kernel, but I really need to 
> use new kernel.
>
> Some background: I installed the Redhat 7.2 through RAID card using 
> Dell GX400 CPU, then I removed the harddrive to an Multi-CPU box. 
> After moving, I found it still using the kernel for single CPU, 
> therefore I have to change to use smp-kernel. I download one rpm from 
> redhat website. After install, I got the above error. I have used the 
> command lilo -v -v, but didn't help.
>
>
> Following is my lilo.conf:
>
> prompt
> timeout=50
> default=linux
> boot=/dev/sda
> map=/boot/map
> install=/boot/boot.b
> message=/boot/message
> linear
>
> image=/boot/vmlinuz-2.4.7-10
> label=linux-smp
> initrd=/boot/initrd-2.4.7-10.img
> read-only
> root=/dev/sda1
> append="hdc=ide-scsi"
>
> image=/boot/vmlinuz-2.4.9-31
> label=linux.bak1
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.9-31.img
>
> image=/boot/vmlinuz-2.4.9-34
> label=linux.bak12
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.9-34.img
>
> image=/boot/vmlinuz-2.4.18-17.7.x
> label=linux.bak123
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-17.7.x.img
>
> image=/boot/vmlinuz-2.4.18-18.7.x
> label=linux.bak1234
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-18.7.x.img
>
> image=/boot/vmlinuz-2.4.18-19.7.x
> label=linux.bak12345
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-19.7.x.img
>
> image=/boot/vmlinuz-2.4.18-24.7.x
> label=linux.bak
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-24.7.x.img
>
> image=/boot/vmlinuz-2.4.18-24.8.0smp
> label=linux123456
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-24.8.0smp.img
>
> image=/boot/vmlinuz-2.4.18-26.7.xsmp
> label=linux-smp
> root=/dev/sda1
> append="hdc=ide-scsi"
> read-only
> initrd=/boot/initrd-2.4.18-26.7.xsmp.img
>
>
> Thanks,
> Yinsheng Li
>
>
>
> _______________________________________________
> Axp-kernel-list mailing list
> [email protected]
> https://listman.redhat.com/mailman/listinfo/axp-kernel-list
>
>