Re: HELP: Kernel panic

Yes, I rebuilt the lilo.conf file.  How can I check config of kernel to see if the kernel can get the image file?

Thanks,
Yinsheng
----- Original Message -----
From: Tom Si <[email protected]>
Date: Sunday, March 23, 2003 10:19 pm
Subject: Re: HELP: Kernel panic

> Have you rebuilded the lilo? checking the img file and the config 
> of 
> kernel to see if the kernel can get the image file.
> 
> wish it can help you
> 
> Tom
> 
> Yinsheng Li wrote:
> 
> > Hello,
> >
> > I have a problem after I upgrade the kernel. While I try to boot 
> from 
> > the new updated kernel, I got an error -- "Kernel panic. No init 
> > found, try init = option to kernel"
> >
> >
> > What should I do now? I can still use old kernel, but I really 
> need to 
> > use new kernel.
> >
> > Some background: I installed the Redhat 7.2 through RAID card 
> using 
> > Dell GX400 CPU, then I removed the harddrive to an Multi-CPU 
> box. 
> > After moving, I found it still using the kernel for single CPU, 
> > therefore I have to change to use smp-kernel. I download one rpm 
> from 
> > redhat website. After install, I got the above error. I have 
> used the 
> > command lilo -v -v, but didn't help.
> >
> >
> > Following is my lilo.conf:
> >
> > prompt
> > timeout=50
> > default=linux
> > boot=/dev/sda
> > map=/boot/map
> > install=/boot/boot.b
> > message=/boot/message
> > linear
> >
> > image=/boot/vmlinuz-2.4.7-10
> > label=linux-smp
> > initrd=/boot/initrd-2.4.7-10.img
> > read-only
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> >
> > image=/boot/vmlinuz-2.4.9-31
> > label=linux.bak1
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.9-31.img
> >
> > image=/boot/vmlinuz-2.4.9-34
> > label=linux.bak12
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.9-34.img
> >
> > image=/boot/vmlinuz-2.4.18-17.7.x
> > label=linux.bak123
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-17.7.x.img
> >
> > image=/boot/vmlinuz-2.4.18-18.7.x
> > label=linux.bak1234
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-18.7.x.img
> >
> > image=/boot/vmlinuz-2.4.18-19.7.x
> > label=linux.bak12345
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-19.7.x.img
> >
> > image=/boot/vmlinuz-2.4.18-24.7.x
> > label=linux.bak
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-24.7.x.img
> >
> > image=/boot/vmlinuz-2.4.18-24.8.0smp
> > label=linux123456
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-24.8.0smp.img
> >
> > image=/boot/vmlinuz-2.4.18-26.7.xsmp
> > label=linux-smp
> > root=/dev/sda1
> > append="hdc=ide-scsi"
> > read-only
> > initrd=/boot/initrd-2.4.18-26.7.xsmp.img
> >
> >
> > Thanks,
> > Yinsheng Li
> >
> >
> >
> > _______________________________________________
> > Axp-kernel-list mailing list
> > [email protected]
> > https://listman.redhat.com/mailman/listinfo/axp-kernel-list
> >
> >
> 
> 
> 
> 
> _______________________________________________
> Axp-kernel-list mailing list
> [email protected]
> https://listman.redhat.com/mailman/listinfo/axp-kernel-list
>