Re: Director Failover

Hi Sebastian,

I run the new pulse and looks like lvs is not started
properly (defunct) by pulse. Appreciate if you can
help me in troubleshooting what could be the problem.

Below is the info I hope can clarify the problem.

Thanks in advance
Chee Chye

The /var/log/messages does not indicate any error:

Mar  6 17:11:35 RADIXS pulse[6053]: STARTING PULSE AS
MASTER
Mar  6 17:11:35 RADIXS pulse: pulse startup succeeded
Mar  6 17:11:53 RADIXS pulse[6053]: partner dead:
activating lvs
Mar  6 17:11:53 RADIXS lvs[6057]: starting virtual
service server1 active: 23
Mar  6 17:11:53 RADIXS nanny[6061]: starting LVS
client monitor for 192.168.123.110:23
Mar  6 17:11:53 RADIXS lvs[6057]: create_monitor for
server1/Real1 running as pid 6061
Mar  6 17:11:58 RADIXS pulse[6062]: gratuitous lvs
arps finished

The ps output of the lvs process as follow:

root      6053     1  0 17:11 ?        00:00:00 pulse
-c /etc/sysconfig/ha/pulse
root      6057  6053  0 17:11 ?        00:00:00 [lvs
<defunct>] 

My pulse.cf as follow:

service = lvs
primary = 192.168.123.127
backup = 0.0.0.0
backup_active = 0
heartbeat = 0
heartbeat_port = 1050
keepalive = 6
deadtime = 18
reservation_conflict_action = preempt
debug_level = NONE
rsh_command = rsh
network = direct

virtual server1 {
         address = 192.168.123.110 eth0:1
         vip_nmask = 255.255.255.0
         active = 1
         load_monitor = none
         timeout = 5
         reentry = 10
         port = 23
         scheduler = rr
         persistent = 60
         pmask = 255.255.255.255
         protocol = tcp

         server Real1 {
                 address = 192.168.123.198
                 active = 1
                 weight = 1
         }
}


 --- Sébastien Bonnet <[email protected]>
wrote: > > I tried to use the new pulse (after patch
and
> compilation) but there
> > is no output telling if pulse start ok or fail
> when I did a ./pulse
> > start. (i.e pulse is not started). I use the old
> pulse and it start
> > ok.
> 
> I haven't changed anything regarding this. So it
> means you haven't
> started the new pulse as you started the old one.
> BTW, check the logs !
> 
> -- 
> Sébastien Bonnet
>   Centre de contacts - Experian France
> 
> 
> 
> _______________________________________________
> Piranha-list mailing list
> [email protected]
>
https://listman.redhat.com/mailman/listinfo/piranha-list 

__________________________________________________
Do You Yahoo!?
Promote your business from just $5 a month!
http://sg.biztools.yahoo.com