RE: LCP TermReq id=0x4 "No network protocols running

Thank you for the link. This guide proved very helpful. The connection no=
w works properly. It seems that the modem had some configuration problems=
.

Jean-Fran=E7ois Dontigny

Minacom=20
Simplifying Service Assurance(tm)

80 Queen Street, 5th Floor, Montreal (Quebec) Canada H3C 2N5
Tel.: (514) 879-9111 x226=20
Fax: (514) 879-9333=20
Email: [email protected]=20
Web: www.minacom.com

-----Original Message-----
From: [email protected] [mailto:redhat-ppp-list-bounces@=
redhat.com] On Behalf Of Stephen Kirkpatrick
Sent: 8 mars 2006 10:26
To: Setting up dialup networking
Subject: Re: LCP TermReq id=3D0x4 "No network protocols running

Not sure what is causing the dropped connection.  I would suggest taking=20
a lot at this howto guide=20
http://ct.radiology.uiowa.edu/~jiangm/software-docs/ppp-dialin-server/
and see if there any discrepancies between your configuration and the=20
one in the howto.  The howto guide proved to be quite helpful for me=20
getting a ppp dialin server working under RedHat 7.x (using PAP - not CHA=
P).

SK

_______________________________________________
Redhat-ppp-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/redhat-ppp-list