RE: RE: sendmail problem
"Steve Gwynn" <[email protected]>
| Newsgroups | gmane.linux.redhat.release.guinness |
|---|---|
| Message-ID | <[email protected]> |
Could be. First check your logs to see if you're getting to you linux box. /var/log/maillog will have sendmail and ipop entries. /var/log/secure will have entries if you've been turned away, etc. /var/log/messages will have other, misc. entries that might give a clue. Sometimes, MS doesn't behave in TCP/IP properly, and you get timeout mismatches, so you could restart your linux network with /sbin/service network restart then try again from the outlook client. >From your outlook computer, try telnet linux.box.etc 25 (that's the snmp port) and if that works, try telnet linux.box.etc 110 (that's the pop port). If telnet connects, then it's one of those MS problems, and I get one here ocassionally on my internel ethernet. -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Swanand P Bhorkar Sent: Tuesday, September 24, 2002 10:07 PM To: [email protected] Subject: Re: RE: sendmail problem I have installed the imap and pop daemons from the rpms available inside the linux CDROM and enabled them inside the /etc/xinetd.d/imap and ipop2 and ipop3. Could it be becasue of the firewall settings onthe server ? thanks, On Wed, 25 Sep 2002 Steve Gwynn wrote : >ipop is not part of sendmail. > >Make sure ipop3d is activated in /etc/xinetd.d >(service xinetd restart) > >tail -f /var/log/messages >and watch what happens when your outlook machine connects. > > > >-----Original Message----- > From: [email protected] >[mailto:[email protected]]On Behalf Of Andrew >Smith >Sent: Tuesday, September 24, 2002 12:05 PM >To: [email protected] >Subject: Re: sendmail problem > > > > Hi all, > > > > I am trying to configure my outlook. But the outlook gives >an > > error, whether i use the servername or its ip address. > > > > Error Message: > > > > "The connection to the server has failed. Account > > 'servername.net', Server: 'serername.net', Protocol: POP3, > > Port:110, Secure(SSL): Yes, Socket Error: 10060, Error >Number > > 0x800CCC0E". > > > > somebody please help. > > > > thanks in advance > > > > swanand bhorkar > >Few suggestions: >1) The firewall on the Linux box doesn't allow POP3 through >2) POP3 isn't enabled/installed on the Linux box >3) IP address/hostname is wrong >4) POP3 port number is wrong (should be 110) > >-- >-Cheers >-Andrew > >MS ... if only he hadn't been hang gliding! > > > >_______________________________________________ >Guinness-list mailing list >[email protected] >https://listman.redhat.com/mailman/listinfo/guinness-list > > > >_______________________________________________ >Guinness-list mailing list >[email protected] >https://listman.redhat.com/mailman/listinfo/guinness-list _______________________________________________ Guinness-list mailing list [email protected] https://listman.redhat.com/mailman/listinfo/guinness-list