Re: smart media changing problem

Dennis Gilmore <[email protected]>
Newsgroups gmane.linux.redhat.release.limbo
Message-ID <[email protected]>
have you tried to do fdisk /dev/sda just to see what partitions are on
the card? and what there types are?

Dennis

 On Thu, 2002-09-19 at 11:46, Gerry Tool wrote:
> On Wed, 2002-09-18 at 15:25, Dennis Gilmore wrote:
> > What if you unplug the reader after unmounting and plug it back in again
> > with the new card in?  i.e reregister the device  with the new card in
> > place.
> > 
> > Dennis
> 
> The same thing happened.  I mounted it, looked at the files in nautilus,
> closed nautilus, unmounted the device, pulled out the usb cable, changed
> cards, plugged the usb cable back in, and the result is:
> 
> [gerry@gstpc gerry]$ umount /mnt/smedia
> 
> This is where I did the physical changing described above.
> 
> [gerry@gstpc gerry]$ mount /mnt/smedia
> mount: block device /dev/sda1 is write-protected, mounting read-only
> mount: wrong fs type, bad option, bad superblock on /dev/sda1,
>        or too many mounted file systems
> [gerry@gstpc gerry]$
> 
> gerry
> 
> > 
> > On Thu, 2002-09-19 at 03:31, Gerry Tool wrote:
> > > I have a Camedia USB smart media reader which Null recognizes and allows
> > > me to mount as /mnt/smedia with an fstab entry as follows.
> > > 
> > > /dev/sda1       /mnt/smedia     vfat    noauto,user 0 0
> > > 
> > > If I have a smart media card in the reader at boot, I can manually
> > > mount/unmount it just fine and read the data on the card.
> > > 
> > > [gerry@gstpc gerry]$ mount /mnt/smedia
> > > mount: block device /dev/sda1 is write-protected, mounting read-only
> > > [gerry@gstpc gerry]$ umount /mnt/smedia
> > > 
> > > However, if I want to remove the card after unmounting the device and
> > > insert another card and mount the device, I get the following error;
> > > 
> > > [gerry@gstpc gerry]$ mount /mnt/smedia
> > > mount: block device /dev/sda1 is write-protected, mounting read-only
> > > mount: wrong fs type, bad option, bad superblock on /dev/sda1,
> > >        or too many mounted file systems
> > > 
> > > There must be some way to use multiple smart media cards without
> > > rebooting.  Any suggestions?  Thanks.
> > > 
> 
> 
> 
> 
> 
> _______________________________________________
> Limbo-list mailing list
> [email protected]
> https://listman.redhat.com/mailman/listinfo/limbo-list
> 
> 
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.