RE: Tape Backup device not found error when using mt

Thanks for Info Randy,

This is what I found - 

[root@www root]# grep -i aic /var//log/messages
[root@www root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: DELL     Model: PERCRAID Mirror  Rev: V1.0
  Type:   Direct-Access                    ANSI SCSI revision: 02
[root@www root]#



>This could be a problem. Do a  'grep -i aic  /var//log/messages'  and 
>check the scsi id of the 39160. If it's set to 7, and the DLT is set to 
>7, you will have problems.
>
>Try a:
>
>    cat /proc/scsi/scsi
>
>This should tell you what devices are attached, and give their scsi 
>id's. If your DLT is the first tape drive on the system, it should be st0.


Thanks for info 


-- 
Psyche-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/psyche-list