RE: Network Interface Card

The DL740 has by default two NIC's (and one for iLO).  If you've added
more, the only way to tell is lspci. 

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Sharpe, Sam J
> Sent: Friday, May 11, 2007 15:30
> To: Discussion of Red Hat Enterprise Linux 3 (Taroon)
> Subject: RE: Network Interface Card
> 
> > > > I have a HP Proliant DL740 G1 server running RHEL AS 3 update 4.
> 
> > > > Is there a command to display how many Network Interface 
> > > > Cards there inside the server without 
> > > > physically looking at the server?
> 
> > >  sudo /sbin/lspci | grep "Ethernet controller" | wc -l
> 
> > Doesn't that assume they have not been disabled in the BIOS? 
> 
> Of course, but if they've been disabled in the BIOS the only 
> way you can
> see them is to check the BIOS, which usually requires at 
> least being at
> the console. If you could do that, you could look at the back of the
> machine and count the RJ45 connectors!
> 
> --
> Taroon-list mailing list
> [email protected]
> https://www.redhat.com/mailman/listinfo/taroon-list
> 

--
Taroon-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/taroon-list