Re: I appear to be a vidiot

Thomas Altfather Good via slackware <[email protected]> Sat, 15 Apr 2017 17:23:15 -0400
Newsgroups gmane.linux.slackware
Message-ID <CAGoMKsd_-3O37dVGAYJSQWFn-F1X3RcskN0Q3v4fjxhAt9pg5w@mail.gmail.com>
Hi Sergei,

This is Slackware64 14.2, vanilla install (full). Chipset is an Intel
Integrated Graphics Controller 4th Gen. on a Lenovo Thinkcentre e73. Cable
is new, I can try another SVGA cable but I doubt that's going to change the
behaviour. And yes, the monitor not only supports 1920 x 1080 - that is the
optimal resolution according to the documentation. HDMI is an option
although I'd have to invest in a cable and I'm cheap. ;-)

HP doesn't offer a driver but I'll try xorg. This is actually a very nice
LED. I'm a photographer and the backlit IPS is great for photo editing.
I'll suffer through spongy fonts until someone comes along with a good open
source driver / functional 10-monitor.conf ...

Thanks much for the reply!

Have a great night.

Thomas

On Sat, Apr 15, 2017 at 5:09 PM, Сергей Владимирович via slackware <
[email protected]> wrote:

> What OS/Distro do you run? what cpu (graphics chip nowdays often built in
> cpu)
>
> At first look you've got either drivers bug or your graphics got quirky
> info from monitor. And maybe quirk is not implemented in driver.
>
> There are several ways to resolve the problem:
>
> - Cable problem? try another data cable for your monitor(displayport,
> hdmi...), if possible do not use hdmi/dp or dp/hdmi converters.
>
> - Semi-broken monitor, maybe another HP monitor with the same model number
> starts well in your setup.
>
> - If possible update driver or even both driver and XOrg.
>
> - Change Monitor to supported one, that works well and have nice picture.
> (And if possible has more attractive design :)
>
> - Backport fix from more recent driver/xorg
>
>
> P.S.
>
> Yes, specs says that your monitor do support 1920x1080
> https://support.hp.com/us-en/product/hp-pavilion-21-inch-
> displays/7274716/model/9651390/document/c04837546
> P.P.S.
> https://www.kubuntuforums.net/showthread.php?68645-Native-
> resolution-not-working
>
>
> On 15.04.2017 22:33, Thomas Altfather Good via slackware wrote:
>
> Hey all,
>
> Try as I might I can't get my X11 intel driver (i915) to fire up my HP
> 22cwa LED at its optimal resolution of 1920 x 1080 at 60 Hz.
>
> If I run startx with no conf file in /etc/X11/xorg.conf.d I get a black
> screen with a cursor in the upper left corner. Ctrl-Alt-F1 and Ctrl-C gets
> me back to a shell prompt.
> The log file has no info - just some chatter between X and HPLIP that
> appears unrelated.
>
> I've generated what appear to be proper modelines via "cvt 1920 1080" but
> if I place them in /etc/X11/xorg.conf.d/10-monitor.conf X starts but
> falls back to 1024 x 768.
>
> Output from cvt:
> # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
> Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088
> 1120 -hsync +vsync
>
> Here is the video chip trivia:lspci -vnn | grep VGA -A 12
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Generation
> Core Processor Family Integrated Graphics Controller [8086:041e] (rev 06)
> (prog-if 00 [VGA controller])
>         Subsystem: Lenovo 4th Generation Core Processor Family Integrated
> Graphics Controller [17aa:3098]
>         Flags: bus master, fast devsel, latency 0, IRQ 30
>         Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
>         Memory at e0000000 (64-bit, prefetchable) [size=256M]
>         I/O ports at f000 [size=64]
>         Expansion ROM at <unassigned> [disabled]
>         Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>         Capabilities: [d0] Power Management version 2
>         Capabilities: [a4] PCI Advanced Features
>         Kernel driver in use: i915
>         Kernel modules: i915
>
> I am currently able to dial up a 1440 x 900 resolution by entering
> modelines into the 10-monitor.conf file but that's the best I can do. The
> fonts are a tad fuzzy (not horrible but not crisp). I previously used a
> 19.5" Acer S200HQL CBD LED that was very crisp but blinding, hence the
> purchase of the HP.
>
> Any ideas on how to continue troubleshooting would be much appreciated!
>
>
>
>
> --
>
> „Leben Sie jetzt die Fragen.“ -- Rainer Maria Rilke
> Thomas Altfather Good
> National Writers Union - UAW Local 1981
> National Press Photographers Association
> Reporters Without Borders USA
> International Federation of Journalists
>
> thomasgood.com
> fb.thomasgood.com
> photos.thomasgood.com
>
>
>
>
> _______________________________________________
> slackware mailing [email protected]://mailman.lug.org.uk/mailman/listinfo/slackware
>
>
> --
> С уважением, Федосов Сергей.
>
>
> _______________________________________________
> slackware mailing list
> [email protected]
> https://mailman.lug.org.uk/mailman/listinfo/slackware
>



-- 

„Leben Sie jetzt die Fragen.“ -- Rainer Maria Rilke
Thomas Altfather Good
National Writers Union - UAW Local 1981
National Press Photographers Association
Reporters Without Borders USA
International Federation of Journalists

thomasgood.com
fb.thomasgood.com
photos.thomasgood.com

_______________________________________________
slackware mailing list
[email protected]
https://mailman.lug.org.uk/mailman/listinfo/slackware