Re: SATA on HP DL-140 G2

On Mon, 2005-09-12 at 08:43 +0200, [email protected] wrote:
> I'm having trouble with a HP DL-140 G2 server with SATA disks. In both
> Tao1, Tao4, RHEL 3 and RHEL 4 the disk is found as /dev/hda and disk I/O
> is terrible, around 3MBytes/sec instead of around 50MBytes/sec.
> 
> The server is certified by Red Hat / HP but neither of theese players
> have been able to answer my questions regarding this, Red Hat tells me
> to talk to HP and HP says "ask red hat".
> 
> Have anyone installed Tao or RHEL on an DL140 G2 with SATA disks and gotten it
> to work? With Ubuntu I get normal performance from the disks on the same server
> so there is no hardware failure. I'm unable to set DMA with hdparm.
<snip>
> Best regards
> /Lars
> 

Lars,

I don't support you ever managed to resolve this did you?

-- 
Dan Tucny <[email protected]>