Re: udhcp problem.

Tomsrtbt does not use udhcp, it has a Lua script called dhcpcd--, which may well have some flaws.

Lua is an interpreted language, so you can work towards fixing it directly in place.

I can't do much more, given that I don't have a router which exposes this issue.

The script is in /bin/dhcpcd--.lua, let me know if you make a fix so I can patch the master.

-Tom

On Wed, 19 Feb 2003, Luc Beenens wrote:

> Date: Wed, 19 Feb 2003 21:22:10 +0100
> From: Luc Beenens <[email protected]>
> To: [email protected]
> Subject: [tomsrtbt] udhcp problem.
>
> Hoi there,
>
> when booting with tomsrtbt-floppy, my box can't get an IP-adres from my (hardware)-router.
> I have a 3com905C NIC. (booting from hdd with SUSE 7.2 gives no problem)
>
> ifconfig shows the following:
>
> eth0     Link encap:ethernet WWadr 00:04:76:19:16:EF
>            inet adr 1.1.1.1   Bcast:255.255.255.255   Mask:255.0.0.0
>            UP BROADCAST RUNNING MULTICAST MTU:1500  Metric:1
>            Rx packets:48  Errors:0  dropped:0   overruns:0   carrier:0
>            collisions: 0   txqueuelen:100
>            RX bytes:2880   TX bytes:624
>            Interrupt:11         Base address:0xe400
>
> Can you please give me some advice??
>
> thanks,
>
> Luc