SMBFS Don't work !!!

Hello Tom,
I'am sorry to disturb you for this problem because i have seen a lot a things in the archive and
i think you've got other thing to do but i really can't connect an smb filesystem

so, i was tried a lot of things :

# this part of code is always the same
# i connect my floppy to run a smb script
mkdir fd
mount -t vfat /dev/fd0 /fd
cd /fd
/smb
# now it's the beginig of the script:
ifconfig eth0 192.168.1.5 netmask=255.255.255.0 up
echo "192.168.1.1 dell" >> /etc/lmhosts
echo "192.168.1.2 jphy" >> /etc/lmhosts
echo "192.168.1.1 dell" >> /etc/hosts
echo "192.168.1.2 jphy" >> /etc/hosts
echo "eth0 192.168.1.5" >> /etc/networks
domainname mdkgroup
hostname tomsrtbt
# now this is the part of case by case

# CASE NUMBER ONE:
insmod ./smbfs.o
ln -s ./smbmount /usr/bin/smbmount
ln -s ./smbumount /usr/bin/smbumount
ln -s ./smbmnt /usr/bin/smbmnt
mkdir /smb
smbmount //192.168.1.1/sys /smb -o guest
# result : 
Using ./smbfs.o
smbmount: symbolic link loop

# CASE NUMBER TWO:
cp smbfs.o /lib/modules
insmod smbfs.o
cp smbmount /usr/bin/smbmount
cp smbumount /usr/bin/smbumount
cp smbmnt /usr/bin/smbmnt
mkdir /smb
smbmount //192.168.1.1/sys /smb -o guest
# result :
Using smbfs.o
param.c:OpenConfFile() - Unable to open configuration file "/usr/local/samba/lib/smb.conf": No such file or directory
Can't load /usr/local/samba/lib/smb.confsmb.conf - run testparm to debug it
load_client_codepage: filename /usr/local/samba/lib/codepages/codepage.850 does not exist.
load_unicode_map: filename /usr/local/samba/lib/codepages/unicode_map.850 does not exist.
session request to 192.168.1.1 failed
session setup failed: ERRDOS - ERRnoaccess ( access denied. )

# CASE NUMBER TREE:
cp smbfs.o /lib/modules
insmod smbfs.o
cp smbmount /usr/bin/smbmount
cp smbumount /usr/bin/smbumount
cp smbmnt /usr/bin/smbmnt
mkdir /smb
mount -t smbfs //192.168.1.1/sys /smb -o guest
# result :
Using smbfs.o
SMBFS: need mount version 6
mount: wrong fs type, bad option, bad superblock on //192.168.1.1/sys, or too many mounted file systems

I have got a big list of example because i have tried a lot of things but these are the
most common errors.
In every case i was in capability to ping the other computer and to get the controle of him by netcat.

do you know a solution for this, or it's really possible my proc are bad
i'am a really newbie under linux.
thank's a lot.