Problems with USB port and a dongle

Hi !

I'm trying to use a dongle for ndiswrapper, but it fails because a 
problem of usb. Note that the problem appear when ndiswrapper is fully 
uninstalled (and others packages as ndiswrapper-utils, with modprobe -r, 
etc...).

So, when I get on the first time the dongle, a lsusb get :

Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
Bus 001 Device 001: ID 0000:0000

But, a few seconds later, the dongle is not recognize with sometimes an 
error -71.
Then, lsusb forget the driver and get :

Bus 001 Device 001: ID 0000:0000

How can I configure the kernel to have the good configuration ? I tried 
different ways, but it fails.

I already reinstalled the bios.

See at below for the result of these commands (when I try the dongle) :
"lspci -v |grep HCI"
"cat /var/log/messages" (the end)
"dmesg |grep usb"

Thanks for help,
Thibaud.


---------------

My hardware :
Computer : dell pentium mmx 233 mst
ram : 128 Mo
dongle : thomson WLG-1500A - chipset Sis163u
Kernel 2.6.19
Ubuntu Edgy

"lspci -v |grep HCI" :

00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 
01) (prog-if 00 [UHCI])

-------------

"cat /var/log/messages"

Feb 11 21:41:08 localhost kernel: [ 6049.104000] usb 1-1: new full speed 
USB device using uhci_hcd and address 2
Feb 11 21:41:08 localhost kernel: [ 6049.252000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:12 localhost kernel: [ 6053.592000] usb 1-1: USB 
disconnect, address 2
Feb 11 21:41:12 localhost kernel: [ 6053.712000] usb 1-1: new full speed 
USB device using uhci_hcd and address 3
Feb 11 21:41:13 localhost kernel: [ 6053.860000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:15 localhost kernel: [ 6056.592000] usb 1-1: USB 
disconnect, address 3
Feb 11 21:41:15 localhost kernel: [ 6056.712000] usb 1-1: new full speed 
USB device using uhci_hcd and address 4
Feb 11 21:41:16 localhost kernel: [ 6056.856000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:19 localhost kernel: [ 6059.700000] usb 1-1: USB 
disconnect, address 4
Feb 11 21:41:19 localhost kernel: [ 6059.812000] usb 1-1: new full speed 
USB device using uhci_hcd and address 5
Feb 11 21:41:20 localhost kernel: [ 6059.960000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:20 localhost kernel: [ 6060.204000] usb 1-1: USB 
disconnect, address 5
Feb 11 21:41:20 localhost kernel: [ 6060.316000] usb 1-1: new full speed 
USB device using uhci_hcd and address 6
Feb 11 21:41:20 localhost kernel: [ 6060.464000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:21 localhost kernel: [ 6062.220000] usb 1-1: USB 
disconnect, address 6
Feb 11 21:41:21 localhost kernel: [ 6062.332000] usb 1-1: new full speed 
USB device using uhci_hcd and address 7
Feb 11 21:41:21 localhost kernel: [ 6062.480000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:22 localhost kernel: [ 6062.724000] usb 1-1: USB 
disconnect, address 7
Feb 11 21:41:22 localhost kernel: [ 6062.836000] usb 1-1: new full speed 
USB device using uhci_hcd and address 8
Feb 11 21:41:22 localhost kernel: [ 6062.984000] usb 1-1: configuration 
#1 chosen from 1 choice
Feb 11 21:41:22 localhost kernel: [ 6063.480000] usb 1-1: USB 
disconnect, address 8
Feb 11 21:41:22 localhost kernel: [ 6063.592000] usb 1-1: new full speed 
USB device using uhci_hcd and address 9
Feb 11 21:41:24 localhost kernel: [ 6064.452000] usb 1-1: new full speed 
USB device using uhci_hcd and address 10
Feb 11 21:41:24 localhost kernel: [ 6065.012000] usb 1-1: new full speed 
USB device using uhci_hcd and address 11
Feb 11 21:41:24 localhost kernel: [ 6065.532000] usb 1-1: new full speed 
USB device using uhci_hcd and address 12


-------------

dmesg |grep usb :

[   17.780000] usbcore: registered new interface driver usbfs
[   17.784000] usbcore: registered new interface driver hub
[   17.788000] usbcore: registered new device driver usb
[   17.808000] usb usb1: configuration #1 chosen from 1 choice
[   69.416000] usbcore: registered new interface driver ndiswrapper
[ 5916.300000] usbcore: deregistering interface driver ndiswrapper
[ 6049.104000] usb 1-1: new full speed USB device using uhci_hcd and 
address 2
[ 6049.252000] usb 1-1: configuration #1 chosen from 1 choice
[ 6053.592000] usb 1-1: USB disconnect, address 2
[ 6053.712000] usb 1-1: new full speed USB device using uhci_hcd and 
address 3
[ 6053.860000] usb 1-1: configuration #1 chosen from 1 choice
[ 6056.592000] usb 1-1: USB disconnect, address 3
[ 6056.712000] usb 1-1: new full speed USB device using uhci_hcd and 
address 4
[ 6056.856000] usb 1-1: configuration #1 chosen from 1 choice
[ 6059.700000] usb 1-1: USB disconnect, address 4
[ 6059.812000] usb 1-1: new full speed USB device using uhci_hcd and 
address 5
[ 6059.960000] usb 1-1: configuration #1 chosen from 1 choice
[ 6060.204000] usb 1-1: USB disconnect, address 5
[ 6060.316000] usb 1-1: new full speed USB device using uhci_hcd and 
address 6
[ 6060.464000] usb 1-1: configuration #1 chosen from 1 choice
[ 6062.220000] usb 1-1: USB disconnect, address 6
[ 6062.332000] usb 1-1: new full speed USB device using uhci_hcd and 
address 7
[ 6062.480000] usb 1-1: configuration #1 chosen from 1 choice
[ 6062.724000] usb 1-1: USB disconnect, address 7
[ 6062.836000] usb 1-1: new full speed USB device using uhci_hcd and 
address 8
[ 6062.984000] usb 1-1: configuration #1 chosen from 1 choice
[ 6063.480000] usb 1-1: USB disconnect, address 8
[ 6063.592000] usb 1-1: new full speed USB device using uhci_hcd and 
address 9
[ 6063.712000] usb 1-1: device descriptor read/64, error -71
[ 6064.340000] usb 1-1: device not accepting address 9, error -71
[ 6064.452000] usb 1-1: new full speed USB device using uhci_hcd and 
address 10
[ 6064.572000] usb 1-1: device descriptor read/64, error -71
[ 6064.796000] usb 1-1: device descriptor read/64, error -71
[ 6065.012000] usb 1-1: new full speed USB device using uhci_hcd and 
address 11
[ 6065.420000] usb 1-1: device not accepting address 11, error -71
[ 6065.532000] usb 1-1: new full speed USB device using uhci_hcd and 
address 12
[ 6065.940000] usb 1-1: device not accepting address 12, error -71

----------------

End of the message


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel