[RFC/PATCH 5/7] move USB gamepads under drivers/input/joystick
Dmitry Torokhov <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
input-move-usb-js.patch
(text/plain, 32.6 KB)
Input: move USB gamepads under drivers/input/joystick
This will allow concentrating all input devices in one place
in {menu|x|q}config.
Signed-off-by: Dmitry Torokhov <[email protected]>
---
drivers/usb/input/xpad.c | 428 ----------------------------------------
drivers/input/joystick/Kconfig | 18 +
drivers/input/joystick/Makefile | 1
drivers/input/joystick/xpad.c | 428 ++++++++++++++++++++++++++++++++++++++++
drivers/usb/input/Kconfig | 14 -
drivers/usb/input/Makefile | 1
6 files changed, 445 insertions(+), 445 deletions(-)
Index: work/drivers/input/joystick/Kconfig
===================================================================
--- work.orig/drivers/input/joystick/Kconfig
+++ work/drivers/input/joystick/Kconfig
@@ -2,7 +2,7 @@
# Joystick driver configuration
#
menuconfig INPUT_JOYSTICK
- bool "Joysticks"
+ bool "Joysticks/Gamepads"
help
If you have a joystick, 6dof controller, gamepad, steering wheel,
weapon control system or something like that you can say Y here
@@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY
config JOYSTICK_DB9
tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
depends on PARPORT
- ---help---
+ help
Say Y here if you have a Sega Master System gamepad, Sega Genesis
gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
Commodore, Amstrad CPC joystick connected to your parallel port.
@@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP
To compile this driver as a module, choose M here: the
module will be called joydump.
+config JOYSTICK_XPAD
+ tristate "X-Box gamepad support"
+ select USB
+ help
+ Say Y here if you want to use the X-Box pad with your computer.
+ Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
+ and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
+
+ For information about how to connect the X-Box pad to USB, see
+ <file:Documentation/input/xpad.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xpad.
+
endif
Index: work/drivers/input/joystick/Makefile
===================================================================
--- work.orig/drivers/input/joystick/Makefile
+++ work/drivers/input/joystick/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o
obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
+obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/
Index: work/drivers/input/joystick/xpad.c
===================================================================
--- /dev/null
+++ work/drivers/input/joystick/xpad.c
@@ -0,0 +1,428 @@
+/*
+ * X-Box gamepad - v0.0.6
+ *
+ * Copyright (c) 2002 Marko Friedemann <[email protected]>
+ * 2004 Oliver Schwartz <[email protected]>,
+ * Steven Toth <[email protected]>,
+ * Franz Lehner <[email protected]>,
+ * Ivan Hawkes <[email protected]>
+ * 2005 Dominic Cerquetti <[email protected]>
+ * 2006 Adam Buchbinder <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * This driver is based on:
+ * - information from http://euc.jp/periphs/xbox-controller.ja.html
+ * - the iForce driver drivers/char/joystick/iforce.c
+ * - the skeleton-driver drivers/usb/usb-skeleton.c
+ *
+ * Thanks to:
+ * - ITO Takayuki for providing essential xpad information on his website
+ * - Vojtech Pavlik - iforce driver / input subsystem
+ * - Greg Kroah-Hartman - usb-skeleton driver
+ * - XBOX Linux project - extra USB id's
+ *
+ * TODO:
+ * - fine tune axes (especially trigger axes)
+ * - fix "analog" buttons (reported as digital now)
+ * - get rumble working
+ * - need USB IDs for other dance pads
+ *
+ * History:
+ *
+ * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
+ *
+ * 2002-07-02 - 0.0.2 : basic working version
+ * - all axes and 9 of the 10 buttons work (german InterAct device)
+ * - the black button does not work
+ *
+ * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
+ * - indentation fixes
+ * - usb + input init sequence fixes
+ *
+ * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
+ * - verified the lack of HID and report descriptors
+ * - verified that ALL buttons WORK
+ * - fixed d-pad to axes mapping
+ *
+ * 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ * - borrowed from the XBOX linux kernel
+ * - USB id's for commonly used dance pads are present
+ * - dance pads will map D-PAD to buttons, not axes
+ * - pass the module paramater 'dpad_to_buttons' to force
+ * the D-PAD to map to buttons if your pad is not detected
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/smp_lock.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_VERSION "v0.0.6"
+#define DRIVER_AUTHOR "Marko Friedemann <[email protected]>"
+#define DRIVER_DESC "X-Box pad driver"
+
+#define XPAD_PKT_LEN 32
+
+/* xbox d-pads should map to buttons, as is required for DDR pads
+ but we map them to axes when possible to simplify things */
+#define MAP_DPAD_TO_BUTTONS 0
+#define MAP_DPAD_TO_AXES 1
+#define MAP_DPAD_UNKNOWN -1
+
+static int dpad_to_buttons;
+module_param(dpad_to_buttons, bool, S_IRUGO);
+MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
+
+static const struct xpad_device {
+ u16 idVendor;
+ u16 idProduct;
+ char *name;
+ u8 dpad_mapping;
+} xpad_device[] = {
+ { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+ { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
+};
+
+static const signed short xpad_btn[] = {
+ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */
+ BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */
+ -1 /* terminating entry */
+};
+
+/* only used if MAP_DPAD_TO_BUTTONS */
+static const signed short xpad_btn_pad[] = {
+ BTN_LEFT, BTN_RIGHT, /* d-pad left, right */
+ BTN_0, BTN_1, /* d-pad up, down (XXX names??) */
+ -1 /* terminating entry */
+};
+
+static const signed short xpad_abs[] = {
+ ABS_X, ABS_Y, /* left stick */
+ ABS_RX, ABS_RY, /* right stick */
+ ABS_Z, ABS_RZ, /* triggers left/right */
+ -1 /* terminating entry */
+};
+
+/* only used if MAP_DPAD_TO_AXES */
+static const signed short xpad_abs_pad[] = {
+ ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */
+ -1 /* terminating entry */
+};
+
+static struct usb_device_id xpad_table [] = {
+ { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
+ { }
+};
+
+MODULE_DEVICE_TABLE (usb, xpad_table);
+
+struct usb_xpad {
+ struct input_dev *dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
+
+ struct urb *irq_in; /* urb for interrupt in report */
+ unsigned char *idata; /* input data */
+ dma_addr_t idata_dma;
+
+ char phys[65]; /* physical device path */
+
+ int dpad_mapping; /* map d-pad to buttons or to axes */
+};
+
+/*
+ * xpad_process_packet
+ *
+ * Completes a request by converting the data into events for the
+ * input subsystem.
+ *
+ * The used report descriptor was taken from ITO Takayukis website:
+ * http://euc.jp/periphs/xbox-controller.ja.html
+ */
+
+static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+{
+ struct input_dev *dev = xpad->dev;
+
+ /* left stick */
+ input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12]));
+ input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14]));
+
+ /* right stick */
+ input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16]));
+ input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18]));
+
+ /* triggers left/right */
+ input_report_abs(dev, ABS_Z, data[10]);
+ input_report_abs(dev, ABS_RZ, data[11]);
+
+ /* digital pad */
+ if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
+ input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
+ } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
+ input_report_key(dev, BTN_LEFT, data[2] & 0x04);
+ input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
+ input_report_key(dev, BTN_0, data[2] & 0x01); // up
+ input_report_key(dev, BTN_1, data[2] & 0x02); // down
+ }
+
+ /* start/back buttons and stick press left/right */
+ input_report_key(dev, BTN_START, data[2] & 0x10);
+ input_report_key(dev, BTN_BACK, data[2] & 0x20);
+ input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
+ input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
+
+ /* "analog" buttons A, B, X, Y */
+ input_report_key(dev, BTN_A, data[4]);
+ input_report_key(dev, BTN_B, data[5]);
+ input_report_key(dev, BTN_X, data[6]);
+ input_report_key(dev, BTN_Y, data[7]);
+
+ /* "analog" buttons black, white */
+ input_report_key(dev, BTN_C, data[8]);
+ input_report_key(dev, BTN_Z, data[9]);
+
+ input_sync(dev);
+}
+
+static void xpad_irq_in(struct urb *urb)
+{
+ struct usb_xpad *xpad = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ xpad_process_packet(xpad, 0, xpad->idata);
+
+exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ err ("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+}
+
+static int xpad_open (struct input_dev *dev)
+{
+ struct usb_xpad *xpad = dev->private;
+
+ xpad->irq_in->dev = xpad->udev;
+ if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void xpad_close (struct input_dev *dev)
+{
+ struct usb_xpad *xpad = dev->private;
+
+ usb_kill_urb(xpad->irq_in);
+}
+
+static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
+{
+ set_bit(abs, input_dev->absbit);
+
+ switch (abs) {
+ case ABS_X:
+ case ABS_Y:
+ case ABS_RX:
+ case ABS_RY: /* the two sticks */
+ input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
+ break;
+ case ABS_Z:
+ case ABS_RZ: /* the triggers */
+ input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+ break;
+ case ABS_HAT0X:
+ case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */
+ input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
+ break;
+ }
+}
+
+static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev (intf);
+ struct usb_xpad *xpad;
+ struct input_dev *input_dev;
+ struct usb_endpoint_descriptor *ep_irq_in;
+ int i;
+
+ for (i = 0; xpad_device[i].idVendor; i++) {
+ if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
+ (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
+ break;
+ }
+
+ xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xpad || !input_dev)
+ goto fail1;
+
+ xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
+ GFP_ATOMIC, &xpad->idata_dma);
+ if (!xpad->idata)
+ goto fail1;
+
+ xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!xpad->irq_in)
+ goto fail2;
+
+ xpad->udev = udev;
+ xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+ if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
+ xpad->dpad_mapping = dpad_to_buttons;
+ xpad->dev = input_dev;
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
+
+ input_dev->name = xpad_device[i].name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = xpad;
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ /* set up buttons */
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ set_bit(xpad_btn[i], input_dev->keybit);
+ if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ set_bit(xpad_btn_pad[i], input_dev->keybit);
+
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+
+ ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(xpad->irq_in, udev,
+ usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
+ xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
+ xpad, ep_irq_in->bInterval);
+ xpad->irq_in->transfer_dma = xpad->idata_dma;
+ xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ input_register_device(xpad->dev);
+
+ usb_set_intfdata(intf, xpad);
+ return 0;
+
+fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+fail1: input_free_device(input_dev);
+ kfree(xpad);
+ return -ENOMEM;
+
+}
+
+static void xpad_disconnect(struct usb_interface *intf)
+{
+ struct usb_xpad *xpad = usb_get_intfdata (intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (xpad) {
+ usb_kill_urb(xpad->irq_in);
+ input_unregister_device(xpad->dev);
+ usb_free_urb(xpad->irq_in);
+ usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN,
+ xpad->idata, xpad->idata_dma);
+ kfree(xpad);
+ }
+}
+
+static struct usb_driver xpad_driver = {
+ .name = "xpad",
+ .probe = xpad_probe,
+ .disconnect = xpad_disconnect,
+ .id_table = xpad_table,
+};
+
+static int __init usb_xpad_init(void)
+{
+ int result = usb_register(&xpad_driver);
+ if (result == 0)
+ info(DRIVER_DESC ":" DRIVER_VERSION);
+ return result;
+}
+
+static void __exit usb_xpad_exit(void)
+{
+ usb_deregister(&xpad_driver);
+}
+
+module_init(usb_xpad_init);
+module_exit(usb_xpad_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
Index: work/drivers/usb/input/Kconfig
===================================================================
--- work.orig/drivers/usb/input/Kconfig
+++ work/drivers/usb/input/Kconfig
@@ -149,20 +149,6 @@ config USB_MOUSE
endmenu
-config USB_XPAD
- tristate "X-Box gamepad support"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use the X-Box pad with your computer.
- Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
- and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
-
- For information about how to connect the X-Box pad to USB, see
- <file:Documentation/input/xpad.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called xpad.
-
config USB_APPLETOUCH
tristate "Apple USB Touchpad support"
depends on USB && INPUT
Index: work/drivers/usb/input/xpad.c
===================================================================
--- work.orig/drivers/usb/input/xpad.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * X-Box gamepad - v0.0.6
- *
- * Copyright (c) 2002 Marko Friedemann <[email protected]>
- * 2004 Oliver Schwartz <[email protected]>,
- * Steven Toth <[email protected]>,
- * Franz Lehner <[email protected]>,
- * Ivan Hawkes <[email protected]>
- * 2005 Dominic Cerquetti <[email protected]>
- * 2006 Adam Buchbinder <[email protected]>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * This driver is based on:
- * - information from http://euc.jp/periphs/xbox-controller.ja.html
- * - the iForce driver drivers/char/joystick/iforce.c
- * - the skeleton-driver drivers/usb/usb-skeleton.c
- *
- * Thanks to:
- * - ITO Takayuki for providing essential xpad information on his website
- * - Vojtech Pavlik - iforce driver / input subsystem
- * - Greg Kroah-Hartman - usb-skeleton driver
- * - XBOX Linux project - extra USB id's
- *
- * TODO:
- * - fine tune axes (especially trigger axes)
- * - fix "analog" buttons (reported as digital now)
- * - get rumble working
- * - need USB IDs for other dance pads
- *
- * History:
- *
- * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
- *
- * 2002-07-02 - 0.0.2 : basic working version
- * - all axes and 9 of the 10 buttons work (german InterAct device)
- * - the black button does not work
- *
- * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
- * - indentation fixes
- * - usb + input init sequence fixes
- *
- * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
- * - verified the lack of HID and report descriptors
- * - verified that ALL buttons WORK
- * - fixed d-pad to axes mapping
- *
- * 2002-07-17 - 0.0.5 : simplified d-pad handling
- *
- * 2004-10-02 - 0.0.6 : DDR pad support
- * - borrowed from the XBOX linux kernel
- * - USB id's for commonly used dance pads are present
- * - dance pads will map D-PAD to buttons, not axes
- * - pass the module paramater 'dpad_to_buttons' to force
- * the D-PAD to map to buttons if your pad is not detected
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/smp_lock.h>
-#include <linux/usb/input.h>
-
-#define DRIVER_VERSION "v0.0.6"
-#define DRIVER_AUTHOR "Marko Friedemann <[email protected]>"
-#define DRIVER_DESC "X-Box pad driver"
-
-#define XPAD_PKT_LEN 32
-
-/* xbox d-pads should map to buttons, as is required for DDR pads
- but we map them to axes when possible to simplify things */
-#define MAP_DPAD_TO_BUTTONS 0
-#define MAP_DPAD_TO_AXES 1
-#define MAP_DPAD_UNKNOWN -1
-
-static int dpad_to_buttons;
-module_param(dpad_to_buttons, bool, S_IRUGO);
-MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
-
-static const struct xpad_device {
- u16 idVendor;
- u16 idProduct;
- char *name;
- u8 dpad_mapping;
-} xpad_device[] = {
- { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
- { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
- { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
- { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
- { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
- { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
- { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
- { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
- { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
- { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
- { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
- { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
- { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
- { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
- { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
- { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
- { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
- { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
- { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
- { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
- { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
- { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
- { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
- { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
- { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
- { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
- { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
- { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
- { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
- { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
- { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
- { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
-};
-
-static const signed short xpad_btn[] = {
- BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */
- BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */
- -1 /* terminating entry */
-};
-
-/* only used if MAP_DPAD_TO_BUTTONS */
-static const signed short xpad_btn_pad[] = {
- BTN_LEFT, BTN_RIGHT, /* d-pad left, right */
- BTN_0, BTN_1, /* d-pad up, down (XXX names??) */
- -1 /* terminating entry */
-};
-
-static const signed short xpad_abs[] = {
- ABS_X, ABS_Y, /* left stick */
- ABS_RX, ABS_RY, /* right stick */
- ABS_Z, ABS_RZ, /* triggers left/right */
- -1 /* terminating entry */
-};
-
-/* only used if MAP_DPAD_TO_AXES */
-static const signed short xpad_abs_pad[] = {
- ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */
- -1 /* terminating entry */
-};
-
-static struct usb_device_id xpad_table [] = {
- { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
- { }
-};
-
-MODULE_DEVICE_TABLE (usb, xpad_table);
-
-struct usb_xpad {
- struct input_dev *dev; /* input device interface */
- struct usb_device *udev; /* usb device */
-
- struct urb *irq_in; /* urb for interrupt in report */
- unsigned char *idata; /* input data */
- dma_addr_t idata_dma;
-
- char phys[65]; /* physical device path */
-
- int dpad_mapping; /* map d-pad to buttons or to axes */
-};
-
-/*
- * xpad_process_packet
- *
- * Completes a request by converting the data into events for the
- * input subsystem.
- *
- * The used report descriptor was taken from ITO Takayukis website:
- * http://euc.jp/periphs/xbox-controller.ja.html
- */
-
-static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
-{
- struct input_dev *dev = xpad->dev;
-
- /* left stick */
- input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12]));
- input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14]));
-
- /* right stick */
- input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16]));
- input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18]));
-
- /* triggers left/right */
- input_report_abs(dev, ABS_Z, data[10]);
- input_report_abs(dev, ABS_RZ, data[11]);
-
- /* digital pad */
- if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
- input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
- input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
- } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
- input_report_key(dev, BTN_LEFT, data[2] & 0x04);
- input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
- input_report_key(dev, BTN_0, data[2] & 0x01); // up
- input_report_key(dev, BTN_1, data[2] & 0x02); // down
- }
-
- /* start/back buttons and stick press left/right */
- input_report_key(dev, BTN_START, data[2] & 0x10);
- input_report_key(dev, BTN_BACK, data[2] & 0x20);
- input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
- input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
-
- /* "analog" buttons A, B, X, Y */
- input_report_key(dev, BTN_A, data[4]);
- input_report_key(dev, BTN_B, data[5]);
- input_report_key(dev, BTN_X, data[6]);
- input_report_key(dev, BTN_Y, data[7]);
-
- /* "analog" buttons black, white */
- input_report_key(dev, BTN_C, data[8]);
- input_report_key(dev, BTN_Z, data[9]);
-
- input_sync(dev);
-}
-
-static void xpad_irq_in(struct urb *urb)
-{
- struct usb_xpad *xpad = urb->context;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- xpad_process_packet(xpad, 0, xpad->idata);
-
-exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static int xpad_open (struct input_dev *dev)
-{
- struct usb_xpad *xpad = dev->private;
-
- xpad->irq_in->dev = xpad->udev;
- if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
- return -EIO;
-
- return 0;
-}
-
-static void xpad_close (struct input_dev *dev)
-{
- struct usb_xpad *xpad = dev->private;
-
- usb_kill_urb(xpad->irq_in);
-}
-
-static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
-{
- set_bit(abs, input_dev->absbit);
-
- switch (abs) {
- case ABS_X:
- case ABS_Y:
- case ABS_RX:
- case ABS_RY: /* the two sticks */
- input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
- break;
- case ABS_Z:
- case ABS_RZ: /* the triggers */
- input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
- break;
- case ABS_HAT0X:
- case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */
- input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
- break;
- }
-}
-
-static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev (intf);
- struct usb_xpad *xpad;
- struct input_dev *input_dev;
- struct usb_endpoint_descriptor *ep_irq_in;
- int i;
-
- for (i = 0; xpad_device[i].idVendor; i++) {
- if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
- (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
- break;
- }
-
- xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!xpad || !input_dev)
- goto fail1;
-
- xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
- GFP_ATOMIC, &xpad->idata_dma);
- if (!xpad->idata)
- goto fail1;
-
- xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->irq_in)
- goto fail2;
-
- xpad->udev = udev;
- xpad->dpad_mapping = xpad_device[i].dpad_mapping;
- if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
- xpad->dpad_mapping = dpad_to_buttons;
- xpad->dev = input_dev;
- usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
- strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
- input_dev->name = xpad_device[i].name;
- input_dev->phys = xpad->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = xpad;
- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- /* set up buttons */
- for (i = 0; xpad_btn[i] >= 0; i++)
- set_bit(xpad_btn[i], input_dev->keybit);
- if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- set_bit(xpad_btn_pad[i], input_dev->keybit);
-
- /* set up axes */
- for (i = 0; xpad_abs[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs[i]);
- if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
- for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
-
- ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
- usb_fill_int_urb(xpad->irq_in, udev,
- usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
- xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
- xpad, ep_irq_in->bInterval);
- xpad->irq_in->transfer_dma = xpad->idata_dma;
- xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- input_register_device(xpad->dev);
-
- usb_set_intfdata(intf, xpad);
- return 0;
-
-fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
-fail1: input_free_device(input_dev);
- kfree(xpad);
- return -ENOMEM;
-
-}
-
-static void xpad_disconnect(struct usb_interface *intf)
-{
- struct usb_xpad *xpad = usb_get_intfdata (intf);
-
- usb_set_intfdata(intf, NULL);
- if (xpad) {
- usb_kill_urb(xpad->irq_in);
- input_unregister_device(xpad->dev);
- usb_free_urb(xpad->irq_in);
- usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN,
- xpad->idata, xpad->idata_dma);
- kfree(xpad);
- }
-}
-
-static struct usb_driver xpad_driver = {
- .name = "xpad",
- .probe = xpad_probe,
- .disconnect = xpad_disconnect,
- .id_table = xpad_table,
-};
-
-static int __init usb_xpad_init(void)
-{
- int result = usb_register(&xpad_driver);
- if (result == 0)
- info(DRIVER_DESC ":" DRIVER_VERSION);
- return result;
-}
-
-static void __exit usb_xpad_exit(void)
-{
- usb_deregister(&xpad_driver);
-}
-
-module_init(usb_xpad_init);
-module_exit(usb_xpad_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
Index: work/drivers/usb/input/Makefile
===================================================================
--- work.orig/drivers/usb/input/Makefile
+++ work/drivers/usb/input/Makefile
@@ -32,7 +32,6 @@ endif
obj-$(CONFIG_USB_HID) += usbhid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
-obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
ifeq ($(CONFIG_USB_DEBUG),y)
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel