[RFC/PATCH 6/7] move USB keyboards under drivers/input/keyboard
Dmitry Torokhov <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
input-move-usb-kbd.patch
(text/plain, 24.9 KB)
Input: move USB keyboards under drivers/input/keyboard
This will allow concentrating all input devices in one place
in {menu|x|q}config.
Signed-off-by: Dmitry Torokhov <[email protected]>
---
drivers/usb/input/usbkbd.c | 362 ----------------------------------------
drivers/input/keyboard/Kconfig | 21 ++
drivers/input/keyboard/Makefile | 1
drivers/input/keyboard/usbkbd.c | 362 ++++++++++++++++++++++++++++++++++++++++
drivers/usb/input/Kconfig | 16 -
drivers/usb/input/Makefile | 1
6 files changed, 383 insertions(+), 380 deletions(-)
Index: work/drivers/input/keyboard/Kconfig
===================================================================
--- work.orig/drivers/input/keyboard/Kconfig
+++ work/drivers/input/keyboard/Kconfig
@@ -1,5 +1,5 @@
#
-# Input core configuration
+# Keyboard driver configuration
#
menuconfig INPUT_KEYBOARD
bool "Keyboards" if EMBEDDED || !X86
@@ -238,4 +238,23 @@ config KEYBOARD_GPIO
To compile this driver as a module, choose M here: the
module will be called gpio-keys.
+comment "It is recommended to enable Full HID support instead of HIDBP drivers"
+ depends on USB_HID=n
+
+config KEYBOARD_USB_HIDBP
+ tristate "USB HIDBP Keyboard (simple Boot - use HID instead)"
+ depends on USB && USB_HID!=y
+ help
+ Say Y here only if you are absolutely sure that you don't want
+ to use the generic HID driver for your USB keyboard and prefer
+ to use the keyboard in its limited Boot Protocol mode instead.
+
+ This is almost certainly not what you want. This is mostly
+ useful for embedded applications or simple keyboards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbkbd.
+
+ If even remotely unsure, say N.
+
endif
Index: work/drivers/input/keyboard/Makefile
===================================================================
--- work.orig/drivers/input/keyboard/Makefile
+++ work/drivers/input/keyboard/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_KEYBOARD_OMAP) += omap-key
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_USB_HIDBP) += usbkbd.o
Index: work/drivers/input/keyboard/usbkbd.c
===================================================================
--- /dev/null
+++ work/drivers/input/keyboard/usbkbd.c
@@ -0,0 +1,362 @@
+/*
+ * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
+ *
+ * Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ * USB HIDBP Keyboard support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <[email protected]>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION ""
+#define DRIVER_AUTHOR "Vojtech Pavlik <[email protected]>"
+#define DRIVER_DESC "USB HID Boot Protocol keyboard driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+static unsigned char usb_kbd_keycode[256] = {
+ 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
+ 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3,
+ 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26,
+ 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
+ 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
+ 105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
+ 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
+ 191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
+ 115,114, 0, 0, 0,121, 0, 89, 93,124, 92, 94, 95, 0, 0, 0,
+ 122,123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
+ 150,158,159,128,136,177,178,176,142,152,173,140
+};
+
+struct usb_kbd {
+ struct input_dev *dev;
+ struct usb_device *usbdev;
+ unsigned char old[8];
+ struct urb *irq, *led;
+ unsigned char newleds;
+ char name[128];
+ char phys[64];
+
+ unsigned char *new;
+ struct usb_ctrlrequest *cr;
+ unsigned char *leds;
+ dma_addr_t cr_dma;
+ dma_addr_t new_dma;
+ dma_addr_t leds_dma;
+};
+
+static void usb_kbd_irq(struct urb *urb)
+{
+ struct usb_kbd *kbd = urb->context;
+ int i;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ for (i = 0; i < 8; i++)
+ input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
+
+ for (i = 2; i < 8; i++) {
+
+ if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) {
+ if (usb_kbd_keycode[kbd->old[i]])
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
+ else
+ info("Unknown key (scancode %#x) released.", kbd->old[i]);
+ }
+
+ if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
+ if (usb_kbd_keycode[kbd->new[i]])
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
+ else
+ info("Unknown key (scancode %#x) pressed.", kbd->new[i]);
+ }
+ }
+
+ input_sync(kbd->dev);
+
+ memcpy(kbd->old, kbd->new, 8);
+
+resubmit:
+ i = usb_submit_urb (urb, GFP_ATOMIC);
+ if (i)
+ err ("can't resubmit intr, %s-%s/input0, status %d",
+ kbd->usbdev->bus->bus_name,
+ kbd->usbdev->devpath, i);
+}
+
+static int usb_kbd_event(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+ struct usb_kbd *kbd = dev->private;
+
+ if (type != EV_LED)
+ return -1;
+
+
+ kbd->newleds = (!!test_bit(LED_KANA, dev->led) << 3) | (!!test_bit(LED_COMPOSE, dev->led) << 3) |
+ (!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_CAPSL, dev->led) << 1) |
+ (!!test_bit(LED_NUML, dev->led));
+
+ if (kbd->led->status == -EINPROGRESS)
+ return 0;
+
+ if (*(kbd->leds) == kbd->newleds)
+ return 0;
+
+ *(kbd->leds) = kbd->newleds;
+ kbd->led->dev = kbd->usbdev;
+ if (usb_submit_urb(kbd->led, GFP_ATOMIC))
+ err("usb_submit_urb(leds) failed");
+
+ return 0;
+}
+
+static void usb_kbd_led(struct urb *urb)
+{
+ struct usb_kbd *kbd = urb->context;
+
+ if (urb->status)
+ warn("led urb status %d received", urb->status);
+
+ if (*(kbd->leds) == kbd->newleds)
+ return;
+
+ *(kbd->leds) = kbd->newleds;
+ kbd->led->dev = kbd->usbdev;
+ if (usb_submit_urb(kbd->led, GFP_ATOMIC))
+ err("usb_submit_urb(leds) failed");
+}
+
+static int usb_kbd_open(struct input_dev *dev)
+{
+ struct usb_kbd *kbd = dev->private;
+
+ kbd->irq->dev = kbd->usbdev;
+ if (usb_submit_urb(kbd->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void usb_kbd_close(struct input_dev *dev)
+{
+ struct usb_kbd *kbd = dev->private;
+
+ usb_kill_urb(kbd->irq);
+}
+
+static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
+{
+ if (!(kbd->irq = usb_alloc_urb(0, GFP_KERNEL)))
+ return -1;
+ if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
+ return -1;
+ if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
+ return -1;
+ if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
+ return -1;
+ if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
+ return -1;
+
+ return 0;
+}
+
+static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
+{
+ usb_free_urb(kbd->irq);
+ usb_free_urb(kbd->led);
+ if (kbd->new)
+ usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
+ if (kbd->cr)
+ usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
+ if (kbd->leds)
+ usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
+}
+
+static int usb_kbd_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(iface);
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_kbd *kbd;
+ struct input_dev *input_dev;
+ int i, pipe, maxp;
+
+ interface = iface->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints != 1)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbd || !input_dev)
+ goto fail1;
+
+ if (usb_kbd_alloc_mem(dev, kbd))
+ goto fail2;
+
+ kbd->usbdev = dev;
+ kbd->dev = input_dev;
+
+ if (dev->manufacturer)
+ strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(kbd->name, " ", sizeof(kbd->name));
+ strlcat(kbd->name, dev->product, sizeof(kbd->name));
+ }
+
+ if (!strlen(kbd->name))
+ snprintf(kbd->name, sizeof(kbd->name),
+ "USB HIDBP Keyboard %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
+ strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
+
+ input_dev->name = kbd->name;
+ input_dev->phys = kbd->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
+ input_dev->private = kbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
+
+ for (i = 0; i < 255; i++)
+ set_bit(usb_kbd_keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+
+ input_dev->event = usb_kbd_event;
+ input_dev->open = usb_kbd_open;
+ input_dev->close = usb_kbd_close;
+
+ usb_fill_int_urb(kbd->irq, dev, pipe,
+ kbd->new, (maxp > 8 ? 8 : maxp),
+ usb_kbd_irq, kbd, endpoint->bInterval);
+ kbd->irq->transfer_dma = kbd->new_dma;
+ kbd->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ kbd->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ kbd->cr->bRequest = 0x09;
+ kbd->cr->wValue = cpu_to_le16(0x200);
+ kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
+ kbd->cr->wLength = cpu_to_le16(1);
+
+ usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
+ (void *) kbd->cr, kbd->leds, 1,
+ usb_kbd_led, kbd);
+ kbd->led->setup_dma = kbd->cr_dma;
+ kbd->led->transfer_dma = kbd->leds_dma;
+ kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+
+ input_register_device(kbd->dev);
+
+ usb_set_intfdata(iface, kbd);
+ return 0;
+
+fail2: usb_kbd_free_mem(dev, kbd);
+fail1: input_free_device(input_dev);
+ kfree(kbd);
+ return -ENOMEM;
+}
+
+static void usb_kbd_disconnect(struct usb_interface *intf)
+{
+ struct usb_kbd *kbd = usb_get_intfdata (intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (kbd) {
+ usb_kill_urb(kbd->irq);
+ input_unregister_device(kbd->dev);
+ usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
+ kfree(kbd);
+ }
+}
+
+static struct usb_device_id usb_kbd_id_table [] = {
+ { USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
+ USB_INTERFACE_PROTOCOL_KEYBOARD) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_kbd_id_table);
+
+static struct usb_driver usb_kbd_driver = {
+ .name = "usbkbd",
+ .probe = usb_kbd_probe,
+ .disconnect = usb_kbd_disconnect,
+ .id_table = usb_kbd_id_table,
+};
+
+static int __init usb_kbd_init(void)
+{
+ int result = usb_register(&usb_kbd_driver);
+ if (result == 0)
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return result;
+}
+
+static void __exit usb_kbd_exit(void)
+{
+ usb_deregister(&usb_kbd_driver);
+}
+
+module_init(usb_kbd_init);
+module_exit(usb_kbd_exit);
Index: work/drivers/usb/input/Kconfig
===================================================================
--- work.orig/drivers/usb/input/Kconfig
+++ work/drivers/usb/input/Kconfig
@@ -115,22 +115,6 @@ config USB_HIDDEV
menu "USB HID Boot Protocol drivers"
depends on USB!=n && USB_HID!=y
-config USB_KBD
- tristate "USB HIDBP Keyboard (simple Boot) support"
- depends on USB && INPUT
- ---help---
- Say Y here only if you are absolutely sure that you don't want
- to use the generic HID driver for your USB keyboard and prefer
- to use the keyboard in its limited Boot Protocol mode instead.
-
- This is almost certainly not what you want. This is mostly
- useful for embedded applications or simple keyboards.
-
- To compile this driver as a module, choose M here: the
- module will be called usbkbd.
-
- If even remotely unsure, say N.
-
config USB_MOUSE
tristate "USB HIDBP Mouse (simple Boot) support"
depends on USB && INPUT
Index: work/drivers/usb/input/Makefile
===================================================================
--- work.orig/drivers/usb/input/Makefile
+++ work/drivers/usb/input/Makefile
@@ -30,7 +30,6 @@ ifeq ($(CONFIG_HID_FF),y)
endif
obj-$(CONFIG_USB_HID) += usbhid.o
-obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
Index: work/drivers/usb/input/usbkbd.c
===================================================================
--- work.orig/drivers/usb/input/usbkbd.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
- *
- * Copyright (c) 1999-2001 Vojtech Pavlik
- *
- * USB HIDBP Keyboard support
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <[email protected]>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <linux/hid.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION ""
-#define DRIVER_AUTHOR "Vojtech Pavlik <[email protected]>"
-#define DRIVER_DESC "USB HID Boot Protocol keyboard driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-static unsigned char usb_kbd_keycode[256] = {
- 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
- 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3,
- 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26,
- 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
- 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
- 105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
- 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
- 191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
- 115,114, 0, 0, 0,121, 0, 89, 93,124, 92, 94, 95, 0, 0, 0,
- 122,123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
- 150,158,159,128,136,177,178,176,142,152,173,140
-};
-
-struct usb_kbd {
- struct input_dev *dev;
- struct usb_device *usbdev;
- unsigned char old[8];
- struct urb *irq, *led;
- unsigned char newleds;
- char name[128];
- char phys[64];
-
- unsigned char *new;
- struct usb_ctrlrequest *cr;
- unsigned char *leds;
- dma_addr_t cr_dma;
- dma_addr_t new_dma;
- dma_addr_t leds_dma;
-};
-
-static void usb_kbd_irq(struct urb *urb)
-{
- struct usb_kbd *kbd = urb->context;
- int i;
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET: /* unlink */
- case -ENOENT:
- case -ESHUTDOWN:
- return;
- /* -EPIPE: should clear the halt */
- default: /* error */
- goto resubmit;
- }
-
- for (i = 0; i < 8; i++)
- input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
-
- for (i = 2; i < 8; i++) {
-
- if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) {
- if (usb_kbd_keycode[kbd->old[i]])
- input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
- else
- info("Unknown key (scancode %#x) released.", kbd->old[i]);
- }
-
- if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
- if (usb_kbd_keycode[kbd->new[i]])
- input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
- else
- info("Unknown key (scancode %#x) pressed.", kbd->new[i]);
- }
- }
-
- input_sync(kbd->dev);
-
- memcpy(kbd->old, kbd->new, 8);
-
-resubmit:
- i = usb_submit_urb (urb, GFP_ATOMIC);
- if (i)
- err ("can't resubmit intr, %s-%s/input0, status %d",
- kbd->usbdev->bus->bus_name,
- kbd->usbdev->devpath, i);
-}
-
-static int usb_kbd_event(struct input_dev *dev, unsigned int type,
- unsigned int code, int value)
-{
- struct usb_kbd *kbd = dev->private;
-
- if (type != EV_LED)
- return -1;
-
-
- kbd->newleds = (!!test_bit(LED_KANA, dev->led) << 3) | (!!test_bit(LED_COMPOSE, dev->led) << 3) |
- (!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_CAPSL, dev->led) << 1) |
- (!!test_bit(LED_NUML, dev->led));
-
- if (kbd->led->status == -EINPROGRESS)
- return 0;
-
- if (*(kbd->leds) == kbd->newleds)
- return 0;
-
- *(kbd->leds) = kbd->newleds;
- kbd->led->dev = kbd->usbdev;
- if (usb_submit_urb(kbd->led, GFP_ATOMIC))
- err("usb_submit_urb(leds) failed");
-
- return 0;
-}
-
-static void usb_kbd_led(struct urb *urb)
-{
- struct usb_kbd *kbd = urb->context;
-
- if (urb->status)
- warn("led urb status %d received", urb->status);
-
- if (*(kbd->leds) == kbd->newleds)
- return;
-
- *(kbd->leds) = kbd->newleds;
- kbd->led->dev = kbd->usbdev;
- if (usb_submit_urb(kbd->led, GFP_ATOMIC))
- err("usb_submit_urb(leds) failed");
-}
-
-static int usb_kbd_open(struct input_dev *dev)
-{
- struct usb_kbd *kbd = dev->private;
-
- kbd->irq->dev = kbd->usbdev;
- if (usb_submit_urb(kbd->irq, GFP_KERNEL))
- return -EIO;
-
- return 0;
-}
-
-static void usb_kbd_close(struct input_dev *dev)
-{
- struct usb_kbd *kbd = dev->private;
-
- usb_kill_urb(kbd->irq);
-}
-
-static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
-{
- if (!(kbd->irq = usb_alloc_urb(0, GFP_KERNEL)))
- return -1;
- if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
- return -1;
- if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
- return -1;
- if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
- return -1;
- if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
- return -1;
-
- return 0;
-}
-
-static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
-{
- usb_free_urb(kbd->irq);
- usb_free_urb(kbd->led);
- if (kbd->new)
- usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
- if (kbd->cr)
- usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
- if (kbd->leds)
- usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
-}
-
-static int usb_kbd_probe(struct usb_interface *iface,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(iface);
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_kbd *kbd;
- struct input_dev *input_dev;
- int i, pipe, maxp;
-
- interface = iface->cur_altsetting;
-
- if (interface->desc.bNumEndpoints != 1)
- return -ENODEV;
-
- endpoint = &interface->endpoint[0].desc;
- if (!usb_endpoint_is_int_in(endpoint))
- return -ENODEV;
-
- pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
- maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
- kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!kbd || !input_dev)
- goto fail1;
-
- if (usb_kbd_alloc_mem(dev, kbd))
- goto fail2;
-
- kbd->usbdev = dev;
- kbd->dev = input_dev;
-
- if (dev->manufacturer)
- strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
-
- if (dev->product) {
- if (dev->manufacturer)
- strlcat(kbd->name, " ", sizeof(kbd->name));
- strlcat(kbd->name, dev->product, sizeof(kbd->name));
- }
-
- if (!strlen(kbd->name))
- snprintf(kbd->name, sizeof(kbd->name),
- "USB HIDBP Keyboard %04x:%04x",
- le16_to_cpu(dev->descriptor.idVendor),
- le16_to_cpu(dev->descriptor.idProduct));
-
- usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
- strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
-
- input_dev->name = kbd->name;
- input_dev->phys = kbd->phys;
- usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &iface->dev;
- input_dev->private = kbd;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
-
- for (i = 0; i < 255; i++)
- set_bit(usb_kbd_keycode[i], input_dev->keybit);
- clear_bit(0, input_dev->keybit);
-
- input_dev->event = usb_kbd_event;
- input_dev->open = usb_kbd_open;
- input_dev->close = usb_kbd_close;
-
- usb_fill_int_urb(kbd->irq, dev, pipe,
- kbd->new, (maxp > 8 ? 8 : maxp),
- usb_kbd_irq, kbd, endpoint->bInterval);
- kbd->irq->transfer_dma = kbd->new_dma;
- kbd->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- kbd->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
- kbd->cr->bRequest = 0x09;
- kbd->cr->wValue = cpu_to_le16(0x200);
- kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
- kbd->cr->wLength = cpu_to_le16(1);
-
- usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
- (void *) kbd->cr, kbd->leds, 1,
- usb_kbd_led, kbd);
- kbd->led->setup_dma = kbd->cr_dma;
- kbd->led->transfer_dma = kbd->leds_dma;
- kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
-
- input_register_device(kbd->dev);
-
- usb_set_intfdata(iface, kbd);
- return 0;
-
-fail2: usb_kbd_free_mem(dev, kbd);
-fail1: input_free_device(input_dev);
- kfree(kbd);
- return -ENOMEM;
-}
-
-static void usb_kbd_disconnect(struct usb_interface *intf)
-{
- struct usb_kbd *kbd = usb_get_intfdata (intf);
-
- usb_set_intfdata(intf, NULL);
- if (kbd) {
- usb_kill_urb(kbd->irq);
- input_unregister_device(kbd->dev);
- usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
- kfree(kbd);
- }
-}
-
-static struct usb_device_id usb_kbd_id_table [] = {
- { USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
- USB_INTERFACE_PROTOCOL_KEYBOARD) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_kbd_id_table);
-
-static struct usb_driver usb_kbd_driver = {
- .name = "usbkbd",
- .probe = usb_kbd_probe,
- .disconnect = usb_kbd_disconnect,
- .id_table = usb_kbd_id_table,
-};
-
-static int __init usb_kbd_init(void)
-{
- int result = usb_register(&usb_kbd_driver);
- if (result == 0)
- info(DRIVER_VERSION ":" DRIVER_DESC);
- return result;
-}
-
-static void __exit usb_kbd_exit(void)
-{
- usb_deregister(&usb_kbd_driver);
-}
-
-module_init(usb_kbd_init);
-module_exit(usb_kbd_exit);
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel