Re: New Device ID: 0d08:0602 UTStarcom DV007

"Stephen J. Gowdy" <[email protected]>
Newsgroups gmane.linux.usb.devel
Message-ID <[email protected]> 
I don't read all the posts here but luckily I caught this one, thanks.

On Sat, 8 Dec 2007, Peter G. wrote:

> Hello,
>
> I hope this is the right place to send an update to the USB device list.
>
> I recently bought an exotic mobile phone called UTStarcom DV007.
> It is a chinese-made, linux-powered GSM smartphone (more info below).
>
> You connect it to a PC via USB cable. If the device detects an USB 
> connection, it prompts the user to enable USB Storage mode. If activated, it 
> acts as an usb-storage device allowing access to the Mini-SD card inserted to 
> the phone.
>
> When storage mode is not activated, it shows up as a Serial device:
>
> I assume this could be used as a modem or to sync stuff with the phone (there 
> is sync software on the phone), but I haven't yet figured out how to use that 
> under Linux. Should someone have any pointers to that I am glad for any 
> input.
>
> A proposed change to usb.ids is attached as a patch.
> lsusb -vv follows:
>
>
> Bus 003 Device 010: ID 0d08:0603 Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        16
>   idVendor           0x0d08
>   idProduct          0x0603
>   bcdDevice            2.23
>   iManufacturer           1 Linux 2.4.19-rmk7-pxa2 with pxa2xx_udc
>   iProduct                2 DV007
>   iSerial                 3 303120446563
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           32
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0x80
>       (Bus Powered)
>     MaxPower              500mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass         8 Mass Storage
>       bInterfaceSubClass      6 SCSI
>       bInterfaceProtocol     80 Bulk (Zip)
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
> Device Status:     0x0001
>   Self Powered
>
>
>
>
> Bus 003 Device 006: ID 0d08:0602 Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            2 Communications
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        16
>   idVendor           0x0d08
>   idProduct          0x0602
>   bcdDevice            0.00
>   iManufacturer           1 DV007
>   iProduct                1 DV007
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           39
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          2 USB Simple Serial Configuration
>     bmAttributes         0x80
>       (Bus Powered)
>     MaxPower              500mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      2
>       bInterfaceProtocol      1
>       iInterface              3 Simple Serial Data Interface - Bulk mode
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0010  1x 16 bytes
>         bInterval               0
> Device Status:     0x0001
>   Self Powered
>
> More info about the device:
> Information in scarce, but this is what I have been able to gather from the 
> web:
> Manufacturer Home Page (chinese):
> http://www.utstar.com.cn/mobile/terminal/mobile_info.jsp?m_id=64
>
> Variants were also branded as Philips 968, Rovershot DV-007 and and GSmax 
> 007,
>
> The linux system used is a decendant of the qtopia-based c8000 project by 
> Cellon. Now defunct.
> http://www.linuxdevices.com/news/NS7219952184.html
>
> That's all, thanks
>   Peter G.
>
> PS: please CC me on reply, I am not (yet) subscribed to linux-usb-devel
>
>

--
  /------------------------------------+-------------------------\
|Stephen J. Gowdy, SLAC               | CERN     Office: 32-2-A22|
|http://www.slac.stanford.edu/~gowdy/ | CH-1211 Geneva 23        |
|                                     | Switzerland              |
|EMail: [email protected]       | Tel: +41 22 767 5840     |
  \------------------------------------+-------------------------/

-------------------------------------------------------------------------
SF.Net email is sponsored by: 
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.