usb regression in 2.6.24-rc4

Greetings guys & gals;

Just a few minutes ago I needed to make use of my scanner, an Epson 1250u.

Firing up xsane, the usual select the device menu window didn't show, and it 
went straight to my tv card as the only input device.

I couldn't recall the name of the tool that scans for scanners that's in the 
sane package, or should be, so I then did an lsusb, but got an empty result!

Unplugging the usb cable from the scanner, then reconnecting the usb cable got 
me the usual disconnect and connect messages in the log, but xsane still 
couldn't find it.

So I rebooted to 2.6.24-rc4 again, same result.  lsusb still gave an empty 
result.  The two kernels were generated from the same .config as far as I 
know.  The -rc3 .config was fed to a "make oldconfig" to make 
the -rc4 .config as is the usual practice.

So I then rebooted to 2.6.24-rc3, and it all works again.  I got the scanning 
done and the pix sent on their merry way.

Anybody have a suggestion of what to check, or maybe a patch to revert?  Or 
a .config option that needs to be enabled?

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Nothing is impossible for the man who doesn't have to do it himself.
		-- A.H. Weiler

-------------------------------------------------------------------------
SF.Net email is sponsored by: 
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel