Re: smartd fails to monitor disks connected to an ASUS PIKE 2008 card

Peter van Hoof <[email protected]>
Newsgroups gmane.linux.utilities.smartmontools
Organization Royal Observatory of Belgium
Message-ID <[email protected]>
Hi Christian,

>> I have 3 disks connected to an ASUS PIKE 2008 controller that I would
>> like to
>> monitor with smartd. The PIKE card works only as a SATA controller and
>> passes
>> the disks straight through (i.e., no RAID is set up). If I try to look
>> at one of
>> those disks with smartctl, I get perfectly normal looking output, e.g.:
>>
>> # smartctl -a /dev/disk/by-id/scsi-SATA_ST31000528AS_6VP0PCXC
>> smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.9.7-1-desktop] (SUSE RPM)
>> Copyright (C) 2002-13, Bruce Allen, Christian Franke,
>> www.smartmontools.org
>>
>> === START OF INFORMATION SECTION ===
>> Model Family:     Seagate Barracuda 7200.12
>> Device Model:     ST31000528AS
>> .... etc ....
>>
>> when I try to include this disk in /etc/smartd.conf, the daemon fails
>> to start
>> with error 16, and I get the error message:
>>
>> /dev/disk/by-id/scsi-SATA_ST31000528AS_6VP0PCXC, not ATA, no IDENTIFY
>> DEVICE
>> Structure
>>
>> This is confusing to me since smartctl clearly identifies the disk as
>> ATA, so I
>> wonder if this is a bug in smartd? Is there a workaround to start
>> monitoring
>> these 3 disks?
>
> Please provide the smartd.conf file.

Here it is... The three commented-out lines are the disks that are 
connected to the PIKE card. If I uncomment one of those, smartd 
immediately exits with error 16.

/dev/disk/by-id/scsi-SATA_SAMSUNG_HD204UI_S2HGJDWZ804967 -I 194 -d ata 
-a -o on -S on -s (S/../.././11|L/../(09|23)/./18) -m root
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD204UI_S2HGJDWZ804973 -I 194 -d ata 
-a -o on -S on -s (S/../.././12|L/../(02|16)/./18) -m root
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD204UI_S2H7JD1Z900189 -I 194 -d ata 
-a -o on -S on -s (S/../.././13|L/../(04|18)/./18) -m root
#/dev/disk/by-id/scsi-SATA_ST31000528AS_6VP0PCXC -I 190 -I 194 -d ata -a 
-o on -S on -s (S/../.././14|L/../(06|20)/./18) -m root
#/dev/disk/by-id/scsi-SATA_ST1000DM005_HD10S246JX0D300179 -I 194 -d ata 
-a -o on -S on -s (S/../.././15|L/../(12|26)/./18) -m root
#/dev/disk/by-id/scsi-SATA_SanDisk_SDSSDX24130863401886 -I 194 -I 195 -d 
ata -a -o on -S on -s (S/../.././02|L/../(03|17)/./08) -m root
/dev/disk/by-id/scsi-SATA_ST3400620NS_9QH06Q20 -I 190 -I 194 -I 195 -d 
ata -a -o on -S on -s (S/../.././05|L/../(01|15)/./12) -m root


Cheers,

Peter.

------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT 
organizations don't have a clear picture of how application performance 
affects their revenue. With AppDynamics, you get 100% visibility into your 
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.