Re: Test done on disks behind a HBA.

Rich <[email protected]>
Newsgroups gmane.linux.utilities.smartmontools
Message-ID <CAOeNLurrD8Mg0gOrLXQhyy1PovQFefYpT_pWDDw5dk0DHV6yYQ@mail.gmail.com>
What kind of disks are each of these? Same model? Different? SAS? SATA?

Are the disks directly attached to the LSI HBA?

What's smartctl -i give you?

- Rich



On Mon, Apr 28, 2014 at 5:28 AM, alessandro macuz
<[email protected]> wrote:
> Hi all,
>
> I have disks directly connected to the motherboard and in an enclosure.
>
> I have plenty of disks but SDA is representative for those attached directly
> and SDJ is representative for those behind the LSI HBA 9205, in the
> encliosure.
>
> I want to monitor the status of the hard disks and I wonder if for the disks
> like sdj the returned status OK has the same meaning of PASSED.
>
> root@server:/tmp/tmp# smartctl -H /dev/sdj
> smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
> SMART Health Status: OK
> root@server:/tmp/tmp# smartctl -H /dev/sda
> smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
>
> What is the difference in the test run, if any, on the two disks?
>
> I need to write a script that checks the disk every 4 hours for a NAS and I
> must know if the disks like sdj are correctly monitored. I tried to use the
> switch -d sat on it but I get the following error
>
> root@server:/tmp/tmp# smartctl -d sat -H /dev/sdj
> smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
> Smartctl: Device Read Identity Failed: scsi error unsupported scsi opcode
>
> A mandatory SMART command failed: exiting. To continue, add one or more '-T
> permissive' options.
>
> Adding "-T permissive" doesn't help much.
>
> Thanks,
>
> Alex
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.  Get
> unparalleled scalability from the best Selenium testing platform available.
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Smartmontools-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>

------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.  Get 
unparalleled scalability from the best Selenium testing platform available.
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.