Re: Test done on disks behind a HBA.

2014-04-28 14:28 GMT+02:00 Rich <[email protected]>:

> What kind of disks are each of these? Same model? Different? SAS? SATA?
>
> Are the disks directly attached to the LSI HBA?
>
> What's smartctl -i give you?
>
> - Rich


Thanks Rich and Robert,

Those attached directly to the builtin controller of the motherboard are
Western digital.

Thus for SDA and SDB I get an output as follows

---------------------------------------------------------------------------------------
root@server:/tmp/tmp# smartctl -i /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital RE4 Serial ATA
Device Model:     WDC WD5003ABYX-18WERA0
Serial Number:    WD-WMAYP4740440
LU WWN Device Id: 5 0014ee 0ae11ae29
Firmware Version: 01.01S02
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Apr 28 14:33:40 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Then all the rest of the disks are put in a SuperMicro enclosure and they
are Intel SSD or Seagate ST32000645SS

for the Seagate drives I get
---------------------------------------------------------------------------------------
root@server:/tmp/tmp# smartctl -i /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Vendor:               SEAGATE
Product:              ST32000645SS
Revision:             0004
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Logical Unit id:      0x5000c50041cdb17b
Serial number:        Z292YA3B00009244DQED
Device type:          disk
Transport protocol:   SAS
Local Time is:        Mon Apr 28 14:35:07 2014 CEST
Device supports SMART and is Enabled
Temperature Warning Enabled
---------------------------------------------------------------------------------------

for the Intel SSDs I get

root@server:/tmp/tmp# smartctl -i /dev/sdn
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-53-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSC2CT240A3
Serial Number:    CVMP228300CW240DGN
LU WWN Device Id: 5 001517 bb29ba8d8
Firmware Version: 300i
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ACS-2 revision 3
Local Time is:    Mon Apr 28 14:38:04 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
---------------------------------------------------------------------------------------

------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.  Get 
unparalleled scalability from the best Selenium testing platform available.
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs

_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support