Re: Samsung SP2514N showing error: is it genuine?

John Lane wrote:
> Hello, I've been using smartctl for a while and my drives are all clean
> except one. It shows a single error that I've shown below. I've done
> "-a" so you can see all the info.
>
> Is this a real error or due to some Samsung firmware issue? I have tried
> -F samsung / samsung2 and samsung3 with no effect - the error is still
> there.
>
> ...
>     9 Power_On_Hours          0x0032   100   100   000    Old_age
> Always       -       37284
> ...
>
> Error 1 occurred at disk power-on lifetime: 30633 hours (1276 days + 9
> hours)
>     When the command that caused the error occurred, the device was
> active or idle.
>
>     After command completion occurred, registers were:
>     ER ST SC SN CL CH DH
>     -- -- -- -- -- -- --
>     84 51 04 47 00 00 e0  Error: ICRC, ABRT 4 sectors at LBA = 0x00000047
> = 71

One read command was ABoRTed ~6600 hours ago due to a temporary (ATA 
UDMA-)Interface CRC error. The problem was likely not visible to any 
application because the OS has retried the read command successfully. 
The SMART values look good.

Thanks,
Christian


------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems