Re: smart Airflow_Temperature_Cel attribute value on Micron RealSSD

I should have clarified it, i meant smartctl -H ( --health) doesn't have an
easy way to ignore some attributes. e.g. in this case 190.

thanks,
Janny


On Fri, Jul 18, 2014 at 12:51 PM, Christian Franke <
[email protected]> wrote:

> Janardhan Molumuri wrote:
>
>> The drivedb.h http://www.smartmontools.org/browser/trunk/smartmontools/
>> drivedb.h doesn't mention the attribute (190 - Airflow_Temperature_Cel).
>>  Is it that the smartctl supposed to report only the below values as
>> specified in the drivedb.h (seems like not the case here)?
>>
>
> The -v options change the default setting for an attribute. Default
> settings are documented in first dummy entry drivedb.h. See also smartctl
> man page.
>
>
>
>  There is no easy way to ignore some attributes on the command line.
>>
>
> Smartctl always prints all attributes provided by the drive. Simply filter
> smartctl output with some script, e.g.
> # /usr/sbin/smartctl -A /dev/sdX | sed '/^194 Temp/d'
>
> Thanks,
> Christian
>
>


-- 
-- JNR

------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds

_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support