Re: smartd.conf not working
John Theodore <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAD53fRBWL9UC2VnUDh2EZW_EitQ+bN1VCR8NGy6qLkXEChgtLQ@mail.gmail.com> |
also ideally I'd like it to report information to syslog On Wed, Sep 17, 2014 at 7:55 PM, John Theodore <[email protected]> wrote: > This command below works and scans 1 disk: > sudo smartctl -l ssd -d megaraid,1 -t short /dev/sdb > > I want to setup my /etc/smartd.conf so it runs a short test every night, > and a long test once a week. The one line in my /etc/smartd.conf is below: > > DEVICESCAN -S on -o on -a -I 194 -s (S/../.././02|L/../../6/03) > > I don't believe this works. What is wrong with this setup of my > smartd.conf? What is the right thing I want? > ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support