Re: smartd.conf not working
John Theodore <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CAD53fRDPW_E6FQXjxzmO40=1x3vA2UBOEGssvouxw4RQMe81EA@mail.gmail.com> |
The devices do appear from the smartctl command. On Sep 19, 2014 12:43 PM, "Christian Franke" <[email protected]> wrote: > John Theodore wrote: > >> This command below works and scans 1 disk: >> sudo smartctl -l ssd -d megaraid,1 -t short /dev/sdb >> >> I want to setup my /etc/smartd.conf so it runs a short test every night, >> and a long test once a week. The one line in my /etc/smartd.conf is below: >> >> DEVICESCAN -S on -o on -a -I 194 -s (S/../.././02|L/../../6/03) >> >> > If the device does not appear in "smartctl --scan-open" output, you need > to add an extra smartd.conf entry: > > /dev/sdb -d megaraid,1 ...(remaining directives)... > > MegaRAID device scanning is implemented in the Linux version of > smartmontools >= 6.1. > > Thanks, > Christian > > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support