Selective self-tests not logged to selective self-test log data structure on WD Green 6TB

Hi,
I have a Western Digital WD Green 6TB, SATA 6Gb/s (WD60EZRX).

But selective self tests are not logged to the selective self-test log
data structure.

Here's the output of -a:

smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.11.10-21-desktop] (SUSE RPM)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD60EZRX-00MVLB1
Serial Number:    WD-WX41D3404227
LU WWN Device Id: 5 0014ee 2b54a4503
Firmware Version: 80.00A80
User Capacity:    6.001.175.126.016 bytes [6,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sun Oct 12 20:25:19 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        46         -
# 2  Selective offline   Completed without error       00%        45         -
# 3  Short offline       Completed without error       00%        45         -
# 4  Short offline       Completed without error       00%        45         -
# 5  Selective offline   Completed without error       00%        44         -
# 6  Extended offline    Completed without error       00%        44         -
# 7  Selective offline   Aborted by host               10%         4         -
# 8  Short offline       Completed without error       00%         2         -
# 9  Conveyance offline  Completed without error       00%         0         -
#10  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing

Best
   Martin

PS: I would have opened a ticket with trac, but that does not work
    with sourceforge accounts (and why would I want to use sf accounts
    on smartmontools.org?). :-(

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://p.sf.net/sfu/Zoho