First thought that popped into my mind is you used the -a. That's good,
but it doesn't give you the results of anything that requires 48-bit ATA
commands. Try with -x instead. That gives you the 48 bit output. Some
drives store stuff there, and this is most definitely a modern drive
(6TB!).
> Hi,
> I have a Western Digital WD Green 6TB, SATA 6Gb/s (WD60EZRX).
>
> But selective self tests are not logged to the selective self-test log
> data structure.
>
> Here's the output of -a:
>
> smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.11.10-21-desktop] (SUSE RPM)
> Copyright (C) 2002-14, Bruce Allen, Christian Franke,
> www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Device Model: WDC WD60EZRX-00MVLB1
> Serial Number: WD-WX41D3404227
> LU WWN Device Id: 5 0014ee 2b54a4503
> Firmware Version: 80.00A80
> User Capacity: 6.001.175.126.016 bytes [6,00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5700 rpm
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
> SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
> Local Time is: Sun Oct 12 20:25:19 2014 CEST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed without error 00% 46
> -
> # 2 Selective offline Completed without error 00% 45
> -
> # 3 Short offline Completed without error 00% 45
> -
> # 4 Short offline Completed without error 00% 45
> -
> # 5 Selective offline Completed without error 00% 44
> -
> # 6 Extended offline Completed without error 00% 44
> -
> # 7 Selective offline Aborted by host 10% 4
> -
> # 8 Short offline Completed without error 00% 2
> -
> # 9 Conveyance offline Completed without error 00% 0
> -
> #10 Short offline Completed without error 00% 0
> -
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
>
> Best
> Martin
>
> PS: I would have opened a ticket with trac, but that does not work
> with sourceforge accounts (and why would I want to use sf accounts
> on smartmontools.org?). :-(
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
> http://p.sf.net/sfu/Zoho
> _______________________________________________
> Smartmontools-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://p.sf.net/sfu/Zoho
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.