Output different for the same smartctl command and version
"AGRAWAL, Vishnu (Vishnu)" <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <622823FB98B29A4CB36E148A045FB7DC0FEA24@SG70YWXCHMBA08.zap.alcatel-lucent.com> |
Hi, On crosschecking two system one in production and another on staging, the disk health status, the same command results in two different output. Command used is "/usr/sbin/smartctl -H /dev/sda". For ESMF server in production it shows 'OK' and for ESM server in staging it shows 'PASSED'. 1. Why is the output different for the same command for the two servers? 2. Does it have different significance? PRODUCTION: =========== [root@TP-ESMF001 monitoring]# /usr/sbin/smartctl -H /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ SMART Health Status: OK STAGING: ======== [root@JW-ESM01 monitoring]# /usr/sbin/smartctl -H /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Kind Regards, Vishnu Agrawal Mobile: +65 97714970 ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support