Seagate ST1000NM0023
Peter Maguire <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Hi I can not enable SMART on a Seagate ST1000NM0023 "smartctl -s on /dev/sg6" === START OF ENABLE/DISABLE COMMANDS SECTION === unable to fetch IEC (SMART) mode page [badly formed scsi parameters] A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options Have tried permissive options OS: Ubuntu 14.04.2 LTS The disk is attached to 1f:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 04) Member of raid 10e any suggestion most welcome Regards Peter -- Name: Peter Maguire E-mail: Peter Maguire <[email protected]> PH: 02 9745 6234 Mobile: 0418 166 297 ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support