SAS1068E - any hope?
[email protected] (Kamil Jońca)
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
I have MB with: --8<---------------cut here---------------start------------->8--- 04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 02) --8<---------------cut here---------------end--------------->8--- controller. There are two sata disks connected to this controller, and I cannot query them with smartctl. --8<---------------cut here---------------start------------->8--- sudo smartctl -a /dev/sdd smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Probable ATA device behind a SAT layer Try an additional '-d ata' or '-d sat' argument. --8<---------------cut here---------------start------------->8--- sudo smartctl -d ata -a /dev/sdd --8<---------------cut here---------------end--------------->8--- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: Invalid argument A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. --8<---------------cut here---------------end--------------->8--- sudo smartctl -d sat -a /dev/sdd --8<---------------cut here---------------start------------->8--- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported scsi opcode A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. --8<---------------cut here---------------end--------------->8--- sudo smartctl -d scsi -a /dev/sdd --8<---------------cut here---------------start------------->8--- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org User Capacity: 2,000,398,934,016 bytes [2,00 TB] Logical block size: 512 bytes Logical Unit id: 0x5000c50061f53cff Serial number: S1E2AFN3 Device type: disk Local Time is: Sat Jul 4 17:44:24 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging --8<---------------cut here---------------end--------------->8--- I saw threads on list, where some people had similar problems (and suggested, that these chips are buggy). So is it any hope that this chip will be supported? KJ -- http://wolnelektury.pl/wesprzyj/teraz/ <``Erik> 18,446,744,073,709,551,616 is a big number ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/