Re: smart monitoring tools for PMC -Sierra RAID controllers

"Sadasivan Shaiju (shshaiju)" <[email protected]>
Newsgroups gmane.linux.utilities.smartmontools
Message-ID <[email protected]>
Hi  Christen,

Here are  the specifics.   Please  let me  know  if you need more  details  or  if anything  is not  clear.


Please be more specific:

Platform?     	X86


Controller?        03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)


SAS oder SATA disks?

This  is  SAS   :   0:9      54 JBOD  -    1.635 TB SAS  HDD N   N  4 KB HUC101818CS4200 


smartctl command line?    /usr/local/sbin/smartctl   -t short  -d  megaraid,54    /dev/sdf    ( run the short test)
			  /usr/local/sbin/smartctl       -d megaraid, 54       /dev/sdf   -a      ( the result)




smartd.conf configuration line?   :  DEVICESCAN  -a



smartctl output (as plain/text attachment)?

Smartd command  :    /usr/local/sbin/smartd   -q onecheck
[root@localhost ~]# /usr/local/sbin/smartctl -t short -d megaraid,54  /dev/sdf
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

Short Background Self Test has begun
Use smartctl -X to abort test




[root@localhost ~]# /usr/local/sbin/smartctl -a -d megaraid,54  /dev/sdf
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUC101818CS4200
Revision:             A703
Compliance:           SPC-4
User Capacity:        1,800,360,124,416 bytes [1.80 TB]
Logical block size:   4096 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        10520 rpm
Form Factor:          2.5 inches
Logical Unit id:      0x5000cca02c018d44
Serial number:        08G0VG5H
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Oct 13 00:22:59 2010 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     40 C
Drive Trip Temperature:          85 C

Manufactured in week 51 of year 2014
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  147
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  171
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 679860473167872

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0       66         0        66      33805      11966.712           0
write:         0        3         0         3     564060      10665.627           0
verify:        0        7         0         7      21018          1.630           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    1853                 - [-   -    -]
# 2  Background short  Completed                   -    1853                 - [-   -    -]
# 3  Background short  Completed                   -    1828                 - [-   -    -]

Long (extended) Self Test duration: 11697 seconds [194.9 minutes]



Regards,
shaiju

Sadasivan Shaiju
TECHNICAL LEADER.ENGINEERING
[email protected]
Phone: +1 408 853 0814
Cisco Systems Limited
510 McCarthy Blvd.
MILPITAS
CALIFORNIA
95035
US
Cisco.com





Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



-----Original Message-----
From: Christian Franke [mailto:[email protected]] 
Sent: Tuesday, August 25, 2015 10:34 PM
To: Sadasivan Shaiju (shshaiju)
Cc: [email protected]
Subject: Re: [smartmontools-support] smart monitoring tools for PMC -Sierra RAID controllers

Sadasivan Shaiju (shshaiju) wrote:
> However  the  test  passed  with  smartctl  utility  . So  this looks  to be an  issue  with  smartd .

Please be more specific:
Platform?
Controller?
SAS oder SATA disks?
smartctl command line?
smartctl output (as plain/text attachment)?
smartd.conf configuration line?

Thanks,
Christian


------------------------------------------------------------------------------
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.