Re: smart monitoring tools for PMC -Sierra RAID controllers
"Sadasivan Shaiju (shshaiju)" <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <[email protected]> |
Hi Christan Resending the information with smartcl output as attached . Appreciate your help . Platform? X86 Controller? 03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02) SAS oder SATA disks? SAS : 0:9 54 JBOD - 1.635 TB SAS HDD N N 4 KB HUC101818CS4200 smartctl command line? /usr/local/sbin/smartctl -t short -d megaraid,54 /dev/sdf ( run the short test) /usr/local/sbin/smartctl -d megaraid, 54 /dev/sdf -a ( the result) smartctl output (as plain/text attachment)? Attached . smartd.conf configuration line? DEVICESCAN -a Smartd command used. /usr/local/sbin/smartd -q onecheck Smartd output Device: /dev/bus/5 [megaraid_disk_54], opened SCSI device Device: /dev/bus/5 [megaraid_disk_54], non-SMART asc,ascq: 94,1 Regards, Shaiju. Sadasivan Shaiju TECHNICAL LEADER.ENGINEERING [email protected] Phone: +1 408 853 0814 Cisco Systems Limited 510 McCarthy Blvd. MILPITAS CALIFORNIA 95035 US Cisco.com Think before you print. This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html -----Original Message----- From: Christian Franke [mailto:[email protected]] Sent: Tuesday, August 25, 2015 10:34 PM To: Sadasivan Shaiju (shshaiju) Cc: [email protected] Subject: Re: [smartmontools-support] smart monitoring tools for PMC -Sierra RAID controllers Sadasivan Shaiju (shshaiju) wrote: > However the test passed with smartctl utility . So this looks to be an issue with smartd . Please be more specific: Platform? Controller? SAS oder SATA disks? smartctl command line? smartctl output (as plain/text attachment)? smartd.conf configuration line? Thanks, Christian ------------------------------------------------------------------------------ _______________________________________________ Smartmontools-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-support
smartctl_output.txt
(text/plain, 2.8 KB)
smartctl output (as plain/text attachment)?
[root@localhost ~]# /usr/local/sbin/smartctl -t short -d megaraid,54 /dev/sdf
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
Short Background Self Test has begun
Use smartctl -X to abort test
[root@localhost ~]# /usr/local/sbin/smartctl -a -d megaraid,54 /dev/sdf smartctl 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUC101818CS4200
Revision: A703
Compliance: SPC-4
User Capacity: 1,800,360,124,416 bytes [1.80 TB]
Logical block size: 4096 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate: 10520 rpm
Form Factor: 2.5 inches
Logical Unit id: 0x5000cca02c018d44
Serial number: 08G0VG5H
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Oct 13 00:22:59 2010 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION === SMART Health Status: OK
Current Drive Temperature: 40 C
Drive Trip Temperature: 85 C
Manufactured in week 51 of year 2014
Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 147 Specified load-unload count over device lifetime: 600000 Accumulated load-unload cycles: 171 Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 679860473167872
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 66 0 66 33805 11966.712 0
write: 0 3 0 3 564060 10665.627 0
verify: 0 7 0 7 21018 1.630 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 1853 - [- - -]
# 2 Background short Completed - 1853 - [- - -]
# 3 Background short Completed - 1828 - [- - -]
Long (extended) Self Test duration: 11697 seconds [194.9 minutes]