Re: smart monitoring tools for PMC -Sierra RAID controllers

Hi Christan,

I have tried the  configuration you  have mentioned . Still I get the same error  with smartd .

[root@localhost etc]# /usr/local/sbin/smartd -q onecheck 


smartd 6.4 2015-06-04 r4109 [x86_64-linux-2.6.32-431.cisco.x86_64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

Opened configuration file /usr/local/etc/smartd.conf Configuration file /usr/local/etc/smartd.conf parsed.
Device: /dev/sdf [megaraid_disk_54], opened
Device: /dev/sdf [megaraid_disk_54], [HGST     HUC101818CS4200  A703], lu id: 0x5000cca02c018d44, S/N: 08G0VG5H, 1.80 TB
Device: /dev/sdf [megaraid_disk_54], is SMART capable. Adding to "monitor" list.
Monitoring 0 ATA and 1 SCSI devices
Device: /dev/sdf [megaraid_disk_54], opened SCSI device
Device: /dev/sdf [megaraid_disk_54], non-SMART asc,ascq: 94,1 Started with '-q onecheck' option. All devices sucessfully checked once.
smartd is exiting (exit status 0)

regards,
shaiju.

Sadasivan Shaiju
TECHNICAL LEADER.ENGINEERING
[email protected]
Phone: +1 408 853 8117
Cisco Systems Limited
3850 Zanker Road
San jose 
CALIFORNIA
95134
US
Cisco.com





Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



-----Original Message-----
From: Christian Franke [mailto:[email protected]] 
Sent: Wednesday, August 26, 2015 10:28 PM
To: Sadasivan Shaiju (shshaiju)
Cc: [email protected]
Subject: Re: [smartmontools-support] smart monitoring tools for PMC -Sierra RAID controllers

Sadasivan Shaiju (shshaiju) wrote:

> SAS oder SATA disks?
>
> SAS
> :   0:9      54 JBOD  -    1.635 TB SAS  HDD N   N  4 KB HUC101818CS4200
>
>
> smartctl command line?
>
> /usr/local/sbin/smartctl      -t  short  -d  megaraid,54    /dev/sdf    ( run the short test)
>
> /usr/local/sbin/smartctl       -d megaraid, 54       /dev/sdf   -a      ( the result)
>
>
> smartctl output (as plain/text attachment)?
>
> Attached .
>
> smartd.conf configuration line?
>
> DEVICESCAN  -a

Try this smartd.conf:

/dev/sdf -d megaraid,54 -a

Thanks,
Christian


------------------------------------------------------------------------------