Areca ARC-1882ix-24
"Mr. Gecko" <[email protected]>
| Newsgroups | gmane.linux.utilities.smartmontools |
|---|---|
| Message-ID | <CABqypqef-rNEiCDQEXSsxd2skcAV8X9jA-O67PJ4xaNVot8OxA@mail.gmail.com> |
I read that smartmontools supports Areca RAID Cards, however I am running
in JBOD and when I run smartctl on the drive, it doesn't return all the
information as it should. This makes me wonder if the smartmontools health
monitor is accurate.
Output from smartmontools:
sudo smartctl -a /dev/sdg
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.5-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: Seagate
Product: ST4000DM000-1F21
Revision: R001
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Logical block size: 512 bytes
Rotation Rate: 10000 rpm
Logical Unit id: 0x001b4d20e4a288c9
Serial number: S300D4DL
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Thu Dec 17 10:47:46 2015 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 25 C
Manufactured in week 30 of year 2002
Specified cycle count over device lifetime: 4278190080
Accumulated start-stop cycles: 256
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 0 0 0 0 0
0.000 0
write: 0 0 0 0 0
0.000 0
Non-medium error count: 0
Device does not support Self Test logging
I would like to know how I can get full smart details from the drive.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-support mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-support