working with xrandr 1.5 not finding how to connect second or third gpu

Greetings
Running debian buster (testing) using lxqt. Have 3 nvidia 570 gpus and 4
1920x1080 monitors. Found that there were some issues with proprietary
drivers nvidia 375.66 - - - was having one gpu halt and upon reboot things
seemed to work again. The time between reboots was getting down to less
than 12 hrs when I landed up with a system with corrupted networking on a
reboot. So in the process of re-install I decided to try the Nouveau
drivers instead. So now I have a one gpu 2 monitor system available. Got to
very much like the four monitors for my work layout so I want the other two
monitors working.

Using xrandr I can see Provider 0,1 and 2.
DVI-I-1 and DVI-I-2 are connected.
DVI-I-2-5 and DVI-I-2-6 are listed as disconnected.

I have been able to create a virtual screen of 3840 x 3000 which is how I
had things before.
Tried $ xrandr --addmode DVI-I-2-5 1920x1080
then DVI-I-2-5 still shows as disconnected but with a resolution of
1920x1080 60.00
Next I tried $ xrandr --output VGA-2 --mode 1920x1080 --pos 1280x1280
--rotate inverted
result - - warning: output VGA-2 not found; ignoring

Any information I haven't provided that would help others help me?

I can't find any guides on how to setup xrandr to use multiple gpus AND
more than 2 or 3 monitors (usually from only 1 gpu). Most of the randr
information I can find is for at newest randr 1.3 and I have 1.5.

I've found
https://cgit.freedesktop.org/xorg/pr...oto-1.5.0#n160
<https://cgit.freedesktop.org/xorg/proto/randrproto/tree/randrproto.txt?id=randrproto-1.5.0#n160>
likely everything I need is hidden in this file but for the life of me I
can't figure out what commands to use. If I were an expert I wouldn't be
asking but I'm not and there are no examples to follow (or try).

Suggestions please?

TIA

_______________________________________________
xdg mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/xdg