Re: Problem with project link

Jon Boone <[email protected]> Fri, 27 Dec 2024 12:42:27 -0500
Newsgroups gmane.lisp.common-lisp-net.devel
Message-ID <CACdCdGgeFxi-q+kkvUEFjLMv=e064Wate+E4uz_hBZwd7TTRWQ@mail.gmail.com>
I can work with Ray on this.  I already corrected the permissions on his
authorized_keys file on future....

—jon


On Fri, Dec 27, 2024 at 12:17 PM David Cooper <[email protected]>
wrote:

> Hi Raymond,
>
> Thanks for your continuing patience. The "repo read only" vibe you're
> experiencing may well be caused by the same issue as your inability to ssh
> to the host, since it might be true that gitlab is using normal ssh behind
> the scenes to do a merge even if said merge is being triggered through the
> web ui.
>
> If someone with sydo on the new machine could get to it before me and
> feels like it, please check the /home/rtoy/.ssh/ for correct ownerships,
> permissions, and authorized_keys contents. Assuming this is not still a
> basic connectivity issue (maybe try ssh -v[v] to confirm that).
>
> Otherwise, I should be able to get on this within the next couple hours.
>
>
> Dave Cooper
>
>
> ---- On Fri, 27 Dec 2024 11:58:24 -0500 * [email protected]
> <[email protected]> * wrote ----
>
> Fedora 41. Just recently upgraded my laptop. But my desktop running Fedora
> 40 has the same thing. But it also had problems connecting.
>
> On Fri, Dec 27, 2024, 8:55 AM Jon Boone <[email protected]> wrote:
>
> The nameserver entry (127.0.0.53) indicates that you have some kind of
> internal process on the machine that should be providing your dns
> resolution.  What OS and version are you running?
>
> —jon
>
>
> On Fri, Dec 27, 2024 at 11:01 AM Raymond Toy <[email protected]>
> wrote:
>
> On Thu, Dec 26, 2024 at 6:39 PM Jon Boone [email protected]
> <https://mailto:[email protected]> wrote:
>
> Yes, that's a strong indication that you have a DNS issue at play.  What
> does /etc/resolv.conf look like on your machine?
>
> It says:
>
> nameserver 127.0.0.53
> options edns0 trust-ad
> search lan
>
>
> I don’t know why. I’ve never touched that file myself. However, the last
> change to that file was Dec 26, 15:13.
>
> But I can now reach gitlab with my browsers. Still can’t ssh into
> gitlab.common-lisp.net (port 22 or 4022). No problems getting to
> common-lisp.net on port 22.
>
> Repo is apparently still read-only because I merge button isn’t merging
> for https://gitlab.common-lisp.net/cmucl/cmucl/-/merge_requests/259
>
>
> —jon
>
>
> On Thu, Dec 26, 2024 at 9:31 PM Raymond Toy <[email protected]> wrote:
>
>
>
> On Thu, Dec 26, 2024 at 6:12 PM Raymond Toy <[email protected]> wrote:
>
>
>
> On Thu, Dec 26, 2024 at 6:03 PM Jon Boone <[email protected]> wrote:
>
> Ray,
>
>   Can you add the following to /etc/hosts, then quit & re-launch your
> browsers to see if that corrects it temporarily?
>
>
> Hey, that worked!  And I didn't even need to relaunch my browser.  I guess
> that means DNS is messed up somewhere?
>
>
> Ok, on a different machine (was using my laptop mostly before), I can now
> navigate to gitlab.common-lisp.net.  I haven't changed anything on this
> machine but I did reboot my wifi router again.
>
> On a different note now that I can access gitlab again, I tried to merge a
> request.  It said the repo (cmucl) was read-only and to try again later.
>
>
>
> 65.108.13.229 gitlab.common-lisp.net
>
>
>
> —jon
>
>
> On Thu, Dec 26, 2024 at 6:31 PM Raymond Toy <[email protected]> wrote:
>
>
>
> On Thu, Dec 26, 2024 at 3:04 PM Jon Boone <[email protected]> wrote:
>
> Ray,
>
>   Your ping is definitely using the correct IPv4 address (65.108.13.229)
> for gitlab.common-lisp.net.  Note, that www.common-lisp.net is still on
> the old host (148.251.208.23).  Unless your browsers are configured with
> DNS-over-HTTPS, you should be able to properly navigate to
> gitlab.common-lisp.net at this point without rebooting or clearing your
> DNS cache.  Can you try again?
>
> I checked and I don't have dns-over-https enabled in either firefox or
> chrome.
>
> Still can't reach gitlab.common-lisp.net.
>
> I rebooted my wifi router too as that's apparently the only way to clear
> the DNS cache there.  (A Nest wifi).
>
>
> —jon
>
>
> On Thu, Dec 26, 2024 at 5:41 PM Raymond Toy <[email protected]> wrote:
>
>
>
> On Thu, Dec 26, 2024 at 12:53 PM David Cooper <[email protected]>
> wrote:
>
>
> Note that the DNS for gitlab.common-lisp.net switched over to a new IP
> address (a new Hetzner host) Christmas eve.
>
>
> What is the correct IP address?  Clearing the OS and browser DNS cache
> didn't seem to make a difference.  I can ping gitlab.common-lisp.net just
> fine:
> ```
> 64 bytes from future.common-lisp.net (65.108.13.229)
> ```
>
>
> So you may need to clear your DNS caches (browsers and OS).
>
> The toplevel common-lisp.net still resolves to the old host for now, so
> ssh'ing there will get you to the legacy host.  But the plan is to move
> that to the new host in due course as well.  I assume you'll need a shell
> login for the new host? The new host is reachable via
> future.common-lisp.net or gitlab.common-lisp.net, and i believe your
> shell login account has been replicated on the new host
>
> Yes, I'd like a shell login.  I still need to access it to upload cmucl
> release tarballs and such.
>
> Thanks for your help.  I think I should reboot my modem and wifi once
> again.  I think that's the only way to clear the DNS cache on my wifi
> router connected to my cable modem.
>
> already.
>
>
>
> Dave Cooper
>
> P.S. these mailing lists are still going through the legacy host.
>
>
> ---- On Thu, 26 Dec 2024 13:45:50 -0500 * [email protected]
> <[email protected]> * wrote ----
>
>
>
> On Thu, Dec 26, 2024 at 8:54 AM Jon Boone <[email protected]> wrote:
>
> I have no problems reaching it via Safari (Version 18.2
> (20620.1.16.11.8))  or Chrome (Version 131.0.6778.205 (Official Build)
> (arm64)) on macOS 15.2 (24C101) as of 2024-12-26 11:55 EST.
>
>
> Ok, it must be me.  I can't reach it on any of my computers, even after
> rebooting my modem and wifi point.  But I can over cellular with my phone.
> But every other site I try works fine over my home wifi.  I can even ssh
> into common-lisp.net.
>
> Not sure what's going on.  I didn't update anything or add a proxy or
> anything like that.
>
>
>
>
> —jon
>
>
> On Thu, Dec 26, 2024 at 11:26 AM Raymond Toy <[email protected]>
> wrote:
>
> On 12/25/24 12:28 PM, Georgiy Tugai wrote:
>
> I believe that the links should be working again now.
>
> FWIW, I can’t reach gitlab.common-lisp.net at all. Firefox says it’s
> unable to connect. Chrome says it can’t be reached. I think this started a
> couple of days ago, maybe?
>
>
> Regards,
> Georgiy
>
> On 25/12/2024 21:02, Robert Goldman wrote:
>
> I was trying to follow a link from the projects hub,
> https://common-lisp.net/phub for usocket, and got a 404.
>
> I've tried clicking some other links and they all 404 also, so maybe
> there's some rewrite or redirect logic that's busted?
>
> Happy Holidays,
> R
>
>
> &#8203;
>
>
>
> --
> Ray
>
>
>
>
> --
> Ray
>
>
>
> --
> Ray
>
>
>
> --
> Ray
>
>
>
> --
> Ray
>
> --
> Ray
>
>
>