Re: Problem with project link

Jon Boone <[email protected]> Fri, 27 Dec 2024 14:44:18 -0500
Newsgroups gmane.lisp.common-lisp-net.devel
Message-ID <CACdCdGiGXN63VRXUL4eAXYtSvb2_wprSsfrL2h901aP1JhrzMg@mail.gmail.com>
I think I was able to configure future.common-lisp.net so Ray can login.
Do we have a wiki or other notes location that I can add to so we can keep
track of these changes for future reference?

—jon


On Fri, Dec 27, 2024 at 12:42 PM Jon Boone <[email protected]> wrote:

> I can work with Ray on this.  I already corrected the permissions on his
> authorized_keys file on future....
>
> —jon
>
>
> On Fri, Dec 27, 2024 at 12:17 PM David Cooper <[email protected]>
> wrote:
>
>> Hi Raymond,
>>
>> Thanks for your continuing patience. The "repo read only" vibe you're
>> experiencing may well be caused by the same issue as your inability to ssh
>> to the host, since it might be true that gitlab is using normal ssh behind
>> the scenes to do a merge even if said merge is being triggered through the
>> web ui.
>>
>> If someone with sydo on the new machine could get to it before me and
>> feels like it, please check the /home/rtoy/.ssh/ for correct ownerships,
>> permissions, and authorized_keys contents. Assuming this is not still a
>> basic connectivity issue (maybe try ssh -v[v] to confirm that).
>>
>> Otherwise, I should be able to get on this within the next couple hours.
>>
>>
>> Dave Cooper
>>
>>
>> ---- On Fri, 27 Dec 2024 11:58:24 -0500 * [email protected]
>> <[email protected]> * wrote ----
>>
>> Fedora 41. Just recently upgraded my laptop. But my desktop running
>> Fedora 40 has the same thing. But it also had problems connecting.
>>
>> On Fri, Dec 27, 2024, 8:55 AM Jon Boone <[email protected]> wrote:
>>
>> The nameserver entry (127.0.0.53) indicates that you have some kind of
>> internal process on the machine that should be providing your dns
>> resolution.  What OS and version are you running?
>>
>> —jon
>>
>>
>> On Fri, Dec 27, 2024 at 11:01 AM Raymond Toy <[email protected]>
>> wrote:
>>
>> On Thu, Dec 26, 2024 at 6:39 PM Jon Boone [email protected]
>> <https://mailto:[email protected]> wrote:
>>
>> Yes, that's a strong indication that you have a DNS issue at play.  What
>> does /etc/resolv.conf look like on your machine?
>>
>> It says:
>>
>> nameserver 127.0.0.53
>> options edns0 trust-ad
>> search lan
>>
>>
>> I don’t know why. I’ve never touched that file myself. However, the last
>> change to that file was Dec 26, 15:13.
>>
>> But I can now reach gitlab with my browsers. Still can’t ssh into
>> gitlab.common-lisp.net (port 22 or 4022). No problems getting to
>> common-lisp.net on port 22.
>>
>> Repo is apparently still read-only because I merge button isn’t merging
>> for https://gitlab.common-lisp.net/cmucl/cmucl/-/merge_requests/259
>>
>>
>> —jon
>>
>>
>> On Thu, Dec 26, 2024 at 9:31 PM Raymond Toy <[email protected]>
>> wrote:
>>
>>
>>
>> On Thu, Dec 26, 2024 at 6:12 PM Raymond Toy <[email protected]>
>> wrote:
>>
>>
>>
>> On Thu, Dec 26, 2024 at 6:03 PM Jon Boone <[email protected]>
>> wrote:
>>
>> Ray,
>>
>>   Can you add the following to /etc/hosts, then quit & re-launch your
>> browsers to see if that corrects it temporarily?
>>
>>
>> Hey, that worked!  And I didn't even need to relaunch my browser.  I
>> guess that means DNS is messed up somewhere?
>>
>>
>> Ok, on a different machine (was using my laptop mostly before), I can now
>> navigate to gitlab.common-lisp.net.  I haven't changed anything on this
>> machine but I did reboot my wifi router again.
>>
>> On a different note now that I can access gitlab again, I tried to merge
>> a request.  It said the repo (cmucl) was read-only and to try again later.
>>
>>
>>
>> 65.108.13.229 gitlab.common-lisp.net
>>
>>
>>
>> —jon
>>
>>
>> On Thu, Dec 26, 2024 at 6:31 PM Raymond Toy <[email protected]>
>> wrote:
>>
>>
>>
>> On Thu, Dec 26, 2024 at 3:04 PM Jon Boone <[email protected]>
>> wrote:
>>
>> Ray,
>>
>>   Your ping is definitely using the correct IPv4 address (65.108.13.229)
>> for gitlab.common-lisp.net.  Note, that www.common-lisp.net is still on
>> the old host (148.251.208.23).  Unless your browsers are configured with
>> DNS-over-HTTPS, you should be able to properly navigate to
>> gitlab.common-lisp.net at this point without rebooting or clearing your
>> DNS cache.  Can you try again?
>>
>> I checked and I don't have dns-over-https enabled in either firefox or
>> chrome.
>>
>> Still can't reach gitlab.common-lisp.net.
>>
>> I rebooted my wifi router too as that's apparently the only way to clear
>> the DNS cache there.  (A Nest wifi).
>>
>>
>> —jon
>>
>>
>> On Thu, Dec 26, 2024 at 5:41 PM Raymond Toy <[email protected]>
>> wrote:
>>
>>
>>
>> On Thu, Dec 26, 2024 at 12:53 PM David Cooper <[email protected]>
>> wrote:
>>
>>
>> Note that the DNS for gitlab.common-lisp.net switched over to a new IP
>> address (a new Hetzner host) Christmas eve.
>>
>>
>> What is the correct IP address?  Clearing the OS and browser DNS cache
>> didn't seem to make a difference.  I can ping gitlab.common-lisp.net
>> just fine:
>> ```
>> 64 bytes from future.common-lisp.net (65.108.13.229)
>> ```
>>
>>
>> So you may need to clear your DNS caches (browsers and OS).
>>
>> The toplevel common-lisp.net still resolves to the old host for now, so
>> ssh'ing there will get you to the legacy host.  But the plan is to move
>> that to the new host in due course as well.  I assume you'll need a shell
>> login for the new host? The new host is reachable via
>> future.common-lisp.net or gitlab.common-lisp.net, and i believe your
>> shell login account has been replicated on the new host
>>
>> Yes, I'd like a shell login.  I still need to access it to upload cmucl
>> release tarballs and such.
>>
>> Thanks for your help.  I think I should reboot my modem and wifi once
>> again.  I think that's the only way to clear the DNS cache on my wifi
>> router connected to my cable modem.
>>
>> already.
>>
>>
>>
>> Dave Cooper
>>
>> P.S. these mailing lists are still going through the legacy host.
>>
>>
>> ---- On Thu, 26 Dec 2024 13:45:50 -0500 * [email protected]
>> <[email protected]> * wrote ----
>>
>>
>>
>> On Thu, Dec 26, 2024 at 8:54 AM Jon Boone <[email protected]>
>> wrote:
>>
>> I have no problems reaching it via Safari (Version 18.2
>> (20620.1.16.11.8))  or Chrome (Version 131.0.6778.205 (Official Build)
>> (arm64)) on macOS 15.2 (24C101) as of 2024-12-26 11:55 EST.
>>
>>
>> Ok, it must be me.  I can't reach it on any of my computers, even after
>> rebooting my modem and wifi point.  But I can over cellular with my phone.
>> But every other site I try works fine over my home wifi.  I can even ssh
>> into common-lisp.net.
>>
>> Not sure what's going on.  I didn't update anything or add a proxy or
>> anything like that.
>>
>>
>>
>>
>> —jon
>>
>>
>> On Thu, Dec 26, 2024 at 11:26 AM Raymond Toy <[email protected]>
>> wrote:
>>
>> On 12/25/24 12:28 PM, Georgiy Tugai wrote:
>>
>> I believe that the links should be working again now.
>>
>> FWIW, I can’t reach gitlab.common-lisp.net at all. Firefox says it’s
>> unable to connect. Chrome says it can’t be reached. I think this started a
>> couple of days ago, maybe?
>>
>>
>> Regards,
>> Georgiy
>>
>> On 25/12/2024 21:02, Robert Goldman wrote:
>>
>> I was trying to follow a link from the projects hub,
>> https://common-lisp.net/phub for usocket, and got a 404.
>>
>> I've tried clicking some other links and they all 404 also, so maybe
>> there's some rewrite or redirect logic that's busted?
>>
>> Happy Holidays,
>> R
>>
>>
>> &#8203;
>>
>>
>>
>> --
>> Ray
>>
>>
>>
>>
>> --
>> Ray
>>
>>
>>
>> --
>> Ray
>>
>>
>>
>> --
>> Ray
>>
>>
>>
>> --
>> Ray
>>
>> --
>> Ray
>>
>>
>>