Re: UNSURE messages end up in inbox folder

# Comment lines MUST have their hash mark in the leftmost column.
# Comments can be added at the end of any line (after whitespace and a '#').
# Blank lines are allowed.

########### General Settings ########################################

#### BOGOFILTER_DIR
#
#	directory for wordlists
#
bogofilter_dir=~/.bogofilter
##bogofilter_dir=/var/spool/bogofilter

#### name/location of user config file
#
user_config_file=~/.bogofilter/.bogofilter.cf
##user_config_file=~/.bogofilterrc
##user_config_file=~/.bogofilter/config

#### TRANSACTIONS: enable/disable database transactions
#
#	boolean indicating whether transactions
#	should be enabled (yes) or disabled (no)
#
db_transaction=no		# default
##db_transaction=yes		# (alternate)

#### WORDLIST: define additional word lists
#
#	char type: 'r' (regular) or 'i' (ignore)
#	char *name: name of list, e.g. "system", "user", "ignore"
#	char *path: absolute path to file or
#		    file name (relative to bogofilter_dir)
#	int  order - once found, skip higher numbered lists
#
##wordlist i,ignore,~/ignorelist.db,1
##wordlist r,wordlist,~/wordlist.db,2

#### SPAM_HEADER_NAME
#
#	used in reporting spamicity and
#	in removing already existing headers
#
spam_header_name=X-Bogosity

#### SPAM_SUBJECT_TAG
#
#	tag added to "Subject: " line for identifying spam or unsure
#	default is to add nothing.
#
spam_subject_tag=***SPAM***
unsure_subject_tag=???UNSURE???

#### STATS_IN_HEADER
#
#	non-zero (default):  put spamicity info in message header
#	zero:  put spamicity info in message body
#	can use "bool" values of True, False, Yes, No, 1, or 0
#
stats_in_header=Yes		# default
##stats_in_header=No		# (alternate)

#### DB_CACHESIZE
#
#	non-zero: set this as DB cache size (in Mbytes)
#	zero:     use DB default cache size (.25 Mbyte in 4.0.14)
#
#	note that Berkeley DB increases any buffer size below 500 MB
#	by 25%!
#	This helps most when doing massive changes to the data base that
#	involve a lot of overwrites, such as registering mail boxes,
#	whereas it is mostly a waste of memory for read-only
#	applications such as scoring.
#	WARNING: If you set this too large, bogofilter will fail.
#
db_cachesize=0			# default
##db_cachesize=16		# (alternate)

#### DB_LOG_AUTOREMOVE
#
#	boolean indicating whether auto-removing of
#	logs should be enabled (yes) or disabled (no)
#
db_log_autoremove=yes		# default
##db_log_autoremove=no		# (alternate)

#### TIMESTAMP
#
#	enables or disables token timestamps
#
timestamp=Yes

#### Format of spamicity output
#
# for two-state output the third entry is not needed and not used
#
spamicity_tags = Spam, Ham, Unsure
spamicity_formats = %0.6f, %0.6f, %0.6f
#
##spamicity_tags = Yes, No, Unsure
##spamicity_formats = %0.6f, %0.6f, %0.6f

#### Format of SPAM_HEADER
#
#	formatting characters:
#
#	    h - spam_header_name, e.g. "X-Bogosity"
#
#	    c - classification, e.g. Yes/No, Spam/Ham/Unsure, +/-/?
#
#	    D - date, fixed ISO-8601 format for Universal Time ("GMT")
#
#	    e - spamicity as 'e' format
#	    f - spamicity as 'f' format
#	    g - spamicity as 'g' format
#
#	    A - IP address (from first Received: statement having one)
#		Not guaranteed to be the originating address of the message.
#	    I - Message ID
#	    Q - Queue ID (from first id tag found in Received: headers)
#
#	    l - logging tag (from '-l' option)
#
#	    o - spam_cutoff, ex. cutoff=%o
#
#	    p - spamicity value
#	    d - if ham or unsure, the spamicity
#		if spam, difference of spamicity from 1.0
#
#	    r - runtype
#	        w - word count
#	        m - message count
#
#	    u - username - this will either be the login from getlogin(),
#			   if that is empty, the pw_name obtained from
#			   the password database, or the user id
#			   prefixed by #, for instance, #1003
#
#	    v - version
#
#    customizable messages:
#
#	header_format - the "X-Bogosity" line that '-p' adds to
#		the message header and '-v' outputs.
#	terse_format - an abbreviated form of header_format;
#		selected by command line option '-t'
#	log_header_format - written to syslog by '-u' option
#		when classifying messages.
#	log_update_format - written to syslog by '-u' option
#		when registering messages.
#
#
#header_format = %h: %c, tests=bogofilter, spamicity=%p, version=%v
#terse_format = %1.1c %f
#log_header_format = %h: %c, spamicity=%p, version=%v
#log_update_format = register-%r, %w words, %m messages
##log_header_format = %h: %c, spamicity=%f, ipaddr=%A, queueID=%Q, msgID=%I, version=%v

#### TERSE
#
#	if enabled, format the X-Bogosity using the 'terse_format' specificaton.
#
terse=no			# default
##terse=yes			# (alternate)


########### Tokenizer Settings ######################################

#### BLOCK ON SUBNETS
#
#	convert IPADDRs into a special token, url:1.2.3.4,
#	and also return url:1.2.3, url:1.2, and url:1
#	to allow identifying spammers by ip address / subnets.
#
#block_on_subnets=no

#### CHARSET handling
#
#	specify default charset
#
charset_default=utf-8		# default
#charset_default=iso-8859-1		# default
#charset_default=us-ascii		# (alternate)
##charset_default=cp866			# for Russian

#### REPLACE_NONASCII_CHARACTERS
#
#	replace non-7bit chars with '?'
#
#replace_nonascii_characters=N		# default
##replace_nonascii_characters=Y		# (alternate)

#### UNICODE handling
#
#	boolean indicating whether raw storage (no) or unicode (yes)
#	is the default encoding for the wordlist
#
unicode=yes				# default
##unicode=no				# (alternate)

#### lexer parameters
#
#	minimum and maximum lengths for single tokens
#
#min-token-len=3			# default
#max-token-len=30			# default
#
#	count and length for multi-word tokens
#	Note: if length not specified, defaults to
#	      multi-token-count * max-token-len (approx)
#
#multi-token-count=1			# default
#max-multi-token-len=0			# default

########### Classification Constants Settings #######################
#
# See man page for a more detailled description of the parameters.

#### MINIMUM DEVIATION
#
#	if token spamicity closer to EVEN_ODDS (0.5)
#	than MIN_DEV, don't use the word in the
#	spamicity calculation
#
#min_dev=0.375				# default

#### Robinson Constants
#
#	floating point values for
#	Robinson S and X coefficients.
#
#robs=0.0178				# default
#robx=0.52				# default

#### CUTOFF Values
#
#	both ham_cutoff and spam_cutoff are allowed.
#	setting ham_cutoff to a non-zero value will
#	enable tri-state results (Spam/Ham/Unsure).
#
ham_cutoff = 0.45			# default
spam_cutoff= 0.99			# default
#
#	for two-state classification:
#
##ham_cutoff  = 0.00			# default
##spam_cutoff = 0.99			# default

#### Effective Size Factor Values
#
#ns_esf = 1.000				# default
#sp_esf = 1.000				# default

#### Auto-update threshold
#
#	Skip autoupdating if the spamicity is within this value
#	of 0.000000 (surely ham) or 1.000000 (surely spam).
#
## thresh_update=0.01			# (optional)