Re: CentOS
jjs - mainphrame <[email protected]>
| Newsgroups | gmane.mail.virus.maiamailguard |
|---|---|
| Message-ID | <CABkzw7zihpqjtYcedve3ekrx5+FfyVBdJ4wezhBboWAptAYDCA@mail.gmail.com> |
Just as a sanity check, does configtest.php still pass? Jake On Fri, Apr 17, 2020 at 10:27 AM Manny Marinho <[email protected]> wrote: > Thank you! So I started from scratch by creating a new DB keeping in > mind the other issues I encountered before with the DB creation. All > went well and what I'm seeing is that once it auto creates the first > user for a domain it then fails to create any new user after that for > any domain. It just keeps throwing the below error. The interesting > thing is that the 0 entry in the error corresponds to the record in > the DB for the first user that was successfully created. > > Apr 17 13:22:53 myhost.mydomain.com ./maiad[5495]: (05495-02) ESMTP> > 451 4.5.0 Error in processing, id=05495-02, cached FAILED: > DBD::mysql::st execute failed: Duplicate entry '0' for key > 'primary_email_idx' > > On Fri, Apr 17, 2020 at 11:22 AM jjs - mainphrame <[email protected]> > wrote: > > > > A duplicate primary key strongly suggests database corruption to me. > I've seen that before, once when the power failed, and another time due to > me naively removing entries from the maia_users table. (A sharp lesson to > only remove users via the maia web interface, or with maiadbtool) > > > > The recovery from the power failure corruption involved exporting the > maia db, dropping it, and importing it with the innodb_force_recovery > option set. In the other case, it was a new install, so the quickest fix > was to drop the maia database, recreate it and import the schema, and set > up the config in the web console again. > > > > Good luck on the DB recovery! > > > > Jake > > > > > > > > On Fri, Apr 17, 2020 at 6:17 AM Manny Marinho <[email protected]> > wrote: > >> > >> Thank you very much! So I had that feature off, I actually had never > >> used that feature before. After I turned it on I noticed it created > >> one user successfully but then after that it kept failing when trying > >> to create any other users for any other domain (although the domains > >> already exist). Keeps repeating the same exact error regardless of the > >> user it's trying to create so I've turned off the feature until I can > >> figure out how to fix this. > >> > >> ./maiad[27427]: (27427-10) ESMTP> 451 4.5.0 Error in processing, > >> id=27427-10, cached FAILED: DBD::mysql::st execute failed: Duplicate > >> entry '0' for key 'primary_email_idx' > >> > >> > >> -Manny > >> > >> On Fri, Apr 17, 2020 at 1:00 AM jjs - mainphrame <[email protected]> > wrote: > >> > > >> > Manny - > >> > > >> > The centos 6 build here is working well. It was initially having > everything passed "CLEAN" with no checks, but after adding the domains, and > then seeing the users autocreated, I went into each user's settings and set > the protection level to "high". After that, maia started scoring their > messages. > >> > > >> > The centos 6 install script is "centos-6-testing.sh" but I will make > it official after I see another few repeatable builds. > >> > > >> > Jake > >> > > >> > On Thu, Apr 16, 2020 at 4:58 PM jjs - mainphrame <[email protected]> > wrote: > >> >> > >> >> I've gotten a centos 6 maia instance up and running, I've uploaded > the install script to the repo and will be sending some mail through to see > how it performs. Will keep you posted. > >> >> > >> >> Jake > >> >> > >> >> On Wed, Apr 15, 2020 at 2:12 PM Manny Marinho < > [email protected]> wrote: > >> >>> > >> >>> I'm also able to create users however in the older version of maia > >> >>> there was a page that would show all the domains and all the users > and > >> >>> you could see the stats for each domain and all the users as well as > >> >>> click on an user or domain and manage the spam for either one right > >> >>> there. I'll try to find a screen shot and send you so you can see > what > >> >>> I mean. > >> >>> > >> >>> On Wed, Apr 15, 2020 at 4:31 PM jjs - mainphrame < > [email protected]> wrote: > >> >>> > > >> >>> > Ah, very interesting, thanks for the details. I'm able to create > domains and users here, but I don't use cpanel, so that's an unknown factor > in the equation. Hope things go more smoothly with the changes you've made. > >> >>> > > >> >>> > Jake > >> >>> > > >> >>> > On Wed, Apr 15, 2020 at 1:11 PM Manny Marinho < > [email protected]> wrote: > >> >>> >> > >> >>> >> Sorry about the delay Jake. I run a dedicated server that hosts > e-mail > >> >>> >> for multiple domains. I have created the various domains within > maia. > >> >>> >> I have only setup one user which is the admin user, the customers > >> >>> >> unfortunately don't really manage their own spam so I take care > of > >> >>> >> that for them. All the domains are currently set to high > protection > >> >>> >> level. In the old maia version in addition to creating a domain I > >> >>> >> could also create a user under that domain and manage the spam > for > >> >>> >> that user under the admin. That functionality no longer seems to > be > >> >>> >> present or perhaps it works differently now. So in the past I > could > >> >>> >> create domain.com and user-9IKiO1iGCm/[email protected] and manage the spam for > both. > >> >>> >> The reason why I would do that is because there are always some > users > >> >>> >> that are more important and/or receive more spam so this allows > for > >> >>> >> finer control. So I may create a bunch of individual users under > a > >> >>> >> particular domain then I would manage spam under the domain and > those > >> >>> >> users. I have configured the setting that allows the admin to > read > >> >>> >> mail for all users. Now I just discovered part of my issue or > perhaps > >> >>> >> the root cause is my Spamassassin install which was all messed > up on > >> >>> >> the server, I run a cpanel server and my host just engaged > cpanel to > >> >>> >> get that squared away. Now that Spamassassin is fixed it's just > >> >>> >> starting to build the bayes DB, I'm also storing the bayes data > in the > >> >>> >> maia database if that makes any difference. > >> >>> >> > >> >>> >> Apr 15 15:51:16.162 [28812] dbg: bayes: using username: amavis > >> >>> >> Apr 15 15:51:16.162 [28812] dbg: bayes: learner_new: got > >> >>> >> store=Mail::SpamAssassin::BayesStore::SQL=HASH(0x3cce0e8) > >> >>> >> Apr 15 15:51:16.162 [28812] dbg: plugin: > >> >>> >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements > >> >>> >> 'learner_is_scan_available', priority 0 > >> >>> >> Apr 15 15:51:16.170 [28812] dbg: bayes: database connection > established > >> >>> >> Apr 15 15:51:16.170 [28812] dbg: bayes: found bayes db version 3 > >> >>> >> Apr 15 15:51:16.171 [28812] dbg: bayes: Using userid: 1 > >> >>> >> Apr 15 15:51:16.171 [28812] dbg: bayes: not available for > scanning, > >> >>> >> only 15 spam(s) in bayes DB < 50 > >> >>> >> Apr 15 15:51:16.171 [28812] dbg: config: score set 1 chosen. > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: EDNS, UDP payload size 4096 > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: servers obtained from > Net::DNS : > >> >>> >> [127.0.0.1]:53, [10.10.10.10]:53 > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: nameservers set to > 127.0.0.1, 10.10.10.10 > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: using socket module: > >> >>> >> IO::Socket::IP version 0.39 > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: is Net::DNS::Resolver > available? yes > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: Net::DNS version: 0.68 > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: sa-learn: spamtest initialized > >> >>> >> Apr 15 15:51:16.172 [28812] dbg: plugin: > >> >>> >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements > >> >>> >> 'learner_dump_database', priority 0 > >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: database connection > established > >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: found bayes db version 3 > >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: Using userid: 1 > >> >>> >> > >> >>> >> 0.000 0 3 0 non-token data: bayes db > version > >> >>> >> 0.000 0 15 0 non-token data: nspam > >> >>> >> 0.000 0 42 0 non-token data: nham > >> >>> >> 0.000 0 12004 0 non-token data: ntokens > >> >>> >> 0.000 0 1586540621 0 non-token data: oldest > atime > >> >>> >> 0.000 0 1586980261 0 non-token data: newest > atime > >> >>> >> 0.000 0 0 0 non-token data: last > journal sync atime > >> >>> >> 0.000 0 1586533304 0 non-token data: last > expiry atime > >> >>> >> 0.000 0 0 0 non-token data: last > expire atime delta > >> >>> >> 0.000 0 0 0 non-token data: last > expire > >> >>> >> reduction count > >> >>> >> > >> >>> >> > >> >>> >> -Manny > >> >>> >> > >> >>> >> On Fri, Apr 10, 2020 at 2:25 PM jjs - mainphrame < > [email protected]> wrote: > >> >>> >> > > >> >>> >> > Just out of curiosity, what is the protection level for the > users in question? > >> >>> >> > > >> >>> >> > Jake > >> >>> >> > > >> >>> >> > On Fri, Apr 10, 2020 at 8:17 AM jjs - mainphrame < > [email protected]> wrote: > >> >>> >> >> > >> >>> >> >> Thanks for the exim details Manny - > >> >>> >> >> > >> >>> >> >> As for your spam detection, are the users in question in the > maia database? > >> >>> >> >> > >> >>> >> >> Here, I had to add the domains in order for users from those > domains to be autocreated. > >> >>> >> >> > >> >>> >> >> Jake > >> >>> >> >> > >> >>> >> >> On Fri, Apr 10, 2020 at 6:24 AM Manny Marinho < > [email protected]> wrote: > >> >>> >> >>> > >> >>> >> >>> Jake here is my exim configuration, I tried to use what > David is using > >> >>> >> >>> on my server but it didn't work for me, exim gave some start > up > >> >>> >> >>> errors. That could be related to my server though as my > current exim > >> >>> >> >>> config file is not based on the latest exim build, it's now > a few > >> >>> >> >>> updates behind. I haven't had the time to merge my config > with the > >> >>> >> >>> latest version but will do that soon. I have everything up > and running > >> >>> >> >>> now and have setup a few domains however regardless of what > protection > >> >>> >> >>> levels I'm setting (either high or even setting them > manually) no > >> >>> >> >>> messages are being cached within the maia interface at all > for any > >> >>> >> >>> domain, I also don't see anything being written to the DB. I > also use > >> >>> >> >>> the setting on all my domains to cache all non-spam which > isn't > >> >>> >> >>> happening either. There are messages hitting maia because I > see the > >> >>> >> >>> activity on the maia log but they all say Passed Clean. This > is > >> >>> >> >>> essentially the same issue I was seeing a few months ago > when I > >> >>> >> >>> decided to install and try the technion maia build. Any > ideas what may > >> >>> >> >>> be causing this or how I can figure this out? Thank you all > very much > >> >>> >> >>> for all your help. > >> >>> >> >>> > >> >>> >> >>> My Router: > >> >>> >> >>> > >> >>> >> >>> amavis: > >> >>> >> >>> driver = manualroute > >> >>> >> >>> condition = "${if eq {$interface_port}{10025} {0}{1}}" > >> >>> >> >>> condition = "${if eq {$spam_score_int}{}{1}{${if <= > >> >>> >> >>> {${spam_score_int}}{00}{0}{1}}}}" > >> >>> >> >>> domains = +local_domains > >> >>> >> >>> transport = amavis > >> >>> >> >>> route_list = "* localhost byname" > >> >>> >> >>> self = send > >> >>> >> >>> verify_recipient = false > >> >>> >> >>> > >> >>> >> >>> > >> >>> >> >>> My Transport: > >> >>> >> >>> > >> >>> >> >>> amavis: > >> >>> >> >>> driver = smtp > >> >>> >> >>> port = 10024 > >> >>> >> >>> allow_localhost > >> >>> >> >>> > >> >>> >> >>> > >> >>> >> >>> On Thu, Apr 9, 2020 at 11:52 PM jjs - mainphrame < > [email protected]> wrote: > >> >>> >> >>> > > >> >>> >> >>> > Thank you, that is useful information. I'll see if I can > build a working config with exim. > >> >>> >> >>> > > >> >>> >> >>> > Jake > >> >>> >> >>> > > >> >>> >> >>> > On Thu, Apr 9, 2020 at 3:22 PM David Byte < > [email protected]> wrote: > >> >>> >> >>> >> > >> >>> >> >>> >> I’ve got an exim config for you. > >> >>> >> >>> >> > >> >>> >> >>> >> I’ve just brought the parts salient to using Maia here. > >> >>> >> >>> >> > >> >>> >> >>> >> Start by verifying with routers that do nothing but > verify alias, mailing lists, etc. > >> >>> >> >>> >> Next pass the mail to a router that can send it to the > Maia server > >> >>> >> >>> >> > >> >>> >> >>> >> check_system_aliases: > >> >>> >> >>> >> driver = redirect > >> >>> >> >>> >> allow_fail > >> >>> >> >>> >> allow_defer > >> >>> >> >>> >> data = ${lookup{$local_part}lsearch{/etc/aliases}} > >> >>> >> >>> >> verify_only > >> >>> >> >>> >> pass_router = amavis > >> >>> >> >>> >> > >> >>> >> >>> >> > >> >>> >> >>> >> And here is the amavis router > >> >>> >> >>> >> amavis: > >> >>> >> >>> >> # Do NOT run if received via 10025/tcp or if already > spam-scanned > >> >>> >> >>> >> # or if bounce message ($sender_address="") > >> >>> >> >>> >> condition = "${if or {{eq {$interface_port}{10025}} \ > >> >>> >> >>> >> {eq {$received_protocol}{spam-scanned}}\ > >> >>> >> >>> >> {eq {$received_protocol}{local}}\ > >> >>> >> >>> >> {eq {$sender_address}{}} \ > >> >>> >> >>> >> }{0}{1} }" > >> >>> >> >>> >> transport = amavis > >> >>> >> >>> >> route_list = "* mailguard.myhost.net byname" > >> >>> >> >>> >> self = send > >> >>> >> >>> >> > >> >>> >> >>> >> > >> >>> >> >>> >> And this in my transport definition > >> >>> >> >>> >> amavis: > >> >>> >> >>> >> driver = smtp > >> >>> >> >>> >> port = 10024 > >> >>> >> >>> >> > >> >>> >> >>> >> > >> >>> >> >>> >> I hope this helps > >> >>> >> >>> >> > >> >>> >> >>> >> On Apr 9, 2020, at 4:54 PM, jjs - mainphrame < > [email protected]> wrote: > >> >>> >> >>> >> > >> >>> >> >>> >> Manny, > >> >>> >> >>> >> > >> >>> >> >>> >> I'd love to see your exim configuration, for future > reference. I've always used postfix, but it would be nice to know of a > working exim configuration, since more choice is good for all of us. > >> >>> >> >>> >> > >> >>> >> >>> >> Jake > >> >>> >> >>> >> > >> >>> >> >>> >> On Thu, Apr 9, 2020 at 8:35 AM Manny Marinho < > [email protected]> wrote: > >> >>> >> >>> >>> > >> >>> >> >>> >>> Hi Jake thanks for the reply. I was able to fix that > problem, it > >> >>> >> >>> >>> appears it was a permissions issue. I ran "maiad debug" > and saw this > >> >>> >> >>> >>> error: > >> >>> >> >>> >>> > >> >>> >> >>> >>> Apr 8 19:52:59 mydomain.com ./maiad[18270]: TROUBLE in > pre_loop_hook: > >> >>> >> >>> >>> TEMPBASE directory is not writable: /var/lib/maia/tmp at > ./maiad line > >> >>> >> >>> >>> 8491. > >> >>> >> >>> >>> > >> >>> >> >>> >>> Suicide () TROUBLE in pre_loop_hook: TEMPBASE directory > is not > >> >>> >> >>> >>> writable: /var/lib/maia/tmp at ./maiad line 8491. > >> >>> >> >>> >>> > >> >>> >> >>> >>> The daemon now starts and runs normally under CentOS 6 > and PHP 7.2. I > >> >>> >> >>> >>> am having another issue however. My configtest.pl tests > fine and so > >> >>> >> >>> >>> does the web configtest.php. I'm using your supplied > Smarty version. I > >> >>> >> >>> >>> created a new maia DB using your manual steps below > which produced one > >> >>> >> >>> >>> error however I don't believe this is significant or the > root cause of > >> >>> >> >>> >>> my problem, > >> >>> >> >>> >>> > >> >>> >> >>> >>> [root@host # mysqladmin create maia > >> >>> >> >>> >>> > >> >>> >> >>> >>> [root@host # mysql maia < maia-mysql.sql > >> >>> >> >>> >>> > >> >>> >> >>> >>> ERROR 1366 (22007) at line 716: Incorrect string value: > '\xC2\x9Atina' > >> >>> >> >>> >>> for column `maia`.`maia_languages`.`language_name` at > row 1 > >> >>> >> >>> >>> > >> >>> >> >>> >>> I also ran the below afterwards since I use amavis as my > maia user, > >> >>> >> >>> >>> > >> >>> >> >>> >>> [root]# mysql -u root -p password > >> >>> >> >>> >>> > >> >>> >> >>> >>> mysql> GRANT CREATE, DROP, ALTER, SELECT, INSERT, > UPDATE, DELETE ON > >> >>> >> >>> >>> maia.* TO amavis@localhost IDENTIFIED BY 'mypassword'; > >> >>> >> >>> >>> > >> >>> >> >>> >>> My problem now is I can't run internal-init.php or > >> >>> >> >>> >>> login.php?super=register as both produce the error: > >> >>> >> >>> >>> > >> >>> >> >>> >>> Error with themes: theme not found or permissions > problem. > >> >>> >> >>> >>> > >> >>> >> >>> >>> The maia error log shows some generic errors which I > don't believe are > >> >>> >> >>> >>> causing any issue. > >> >>> >> >>> >>> > >> >>> >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP > Deprecated: Methods > >> >>> >> >>> >>> with the same name as their class will not be > constructors in a future > >> >>> >> >>> >>> version of PHP; ThemeSmarty has a deprecated constructor > in > >> >>> >> >>> >>> /home/folder/public_html/maia/smarty.php on line 85 > >> >>> >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP > Deprecated: Methods > >> >>> >> >>> >>> with the same name as their class will not be > constructors in a future > >> >>> >> >>> >>> version of PHP; Smarty has a deprecated constructor in > >> >>> >> >>> >>> /usr/local/lib/php/Smarty2/Smarty.class.php on line 64 > >> >>> >> >>> >>> > >> >>> >> >>> >>> All my web facing files sit in > /home/folder/public_html/maia/ instead > >> >>> >> >>> >>> of /var/www/html/maia/ this is very similar to an old > maia setup I > >> >>> >> >>> >>> used to have running in the past. > >> >>> >> >>> >>> > >> >>> >> >>> >>> > >> >>> >> >>> >>> -Manny > >> >>> >> >>> >>> > >> >>> >> >>> >>> On Wed, Apr 8, 2020 at 11:11 PM < > [email protected]> wrote: > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Send Maia-users mailing list submissions to > >> >>> >> >>> >>> > [email protected] > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > To subscribe or unsubscribe via the World Wide Web, > visit > >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > or, via email, send a message with subject or body > 'help' to > >> >>> >> >>> >>> > [email protected] > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > You can reach the person managing the list at > >> >>> >> >>> >>> > [email protected] > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > When replying, please edit your Subject line so it is > more specific > >> >>> >> >>> >>> > than "Re: Contents of Maia-users digest..." > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Today's Topics: > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > 1. CentOS 6 (Manny Marinho) > >> >>> >> >>> >>> > 2. Re: CentOS 6 (jjs - mainphrame) > >> >>> >> >>> >>> > 3. Re: CentOS 6 (Ed) > >> >>> >> >>> >>> > 4. Re: CentOS 6 (Lawrence Mulder) > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > ---------------------------------------------------------------------- > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Message: 1 > >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 18:21:38 -0400 > >> >>> >> >>> >>> > From: Manny Marinho <[email protected]> > >> >>> >> >>> >>> > To: [email protected] > >> >>> >> >>> >>> > Subject: [Maia-users] CentOS 6 > >> >>> >> >>> >>> > Message-ID: < > E3A2C447-0C18-41B5-B670-EEDE3182B00C-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >> >>> >> >>> >>> > Content-Type: text/plain; charset=utf-8 > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > I know it’s end of life but has anybody gotten this to > work with CentOS 6? I’ve tried to use the installer for CentOS 7 which > appears to work for the most part although my MTA is exim and I’m familiar > with the exim config part from using the original maia version. Seems the > issue that I’m seeing is the maia daemon won’t start or nothing happens > when you try to run it manually. > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > -Manny > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > On Apr 8, 2020, at 3:00 PM, > [email protected] wrote: > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Send Maia-users mailing list submissions to > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > To subscribe or unsubscribe via the World Wide Web, > visit > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > or, via email, send a message with subject or body > 'help' to > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > You can reach the person managing the list at > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > When replying, please edit your Subject line so it > is more specific > >> >>> >> >>> >>> > > than "Re: Contents of Maia-users digest..." > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Today's Topics: > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > ---------------------------------------------------------------------- > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Message: 1 > >> >>> >> >>> >>> > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >>> >> >>> >>> > > From: jjs - mainphrame <[email protected]> > >> >>> >> >>> >>> > > To: [email protected] > >> >>> >> >>> >>> > > Subject: [Maia-users] maia on suse leap 15.1 > >> >>> >> >>> >>> > > Message-ID: > >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected]> > >> >>> >> >>> >>> > > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Hi folks, > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > My goal today was to achieve a working maia install > on suse leap 15.1 > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > It comes as no surprise that the perl parts all work > perfectly and > >> >>> >> >>> >>> > > configtest.pl is fine. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > But I'm seeing weird errors with php and pear. The > pear modules are > >> >>> >> >>> >>> > > installed, pear list shows them, but configtest.php > can't find them. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > I'll keep chipping away at it, but thought I'd check > to see if anyone on > >> >>> >> >>> >>> > > the list has had any luck with maia on suse leap and > php 7.x, or any words > >> >>> >> >>> >>> > > of wisdom on that score - > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Cheers, > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Jake > >> >>> >> >>> >>> > > -------------- next part -------------- > >> >>> >> >>> >>> > > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > ------------------------------ > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Subject: Digest Footer > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > ------------------------------ > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > End of Maia-users Digest, Vol 171, Issue 2 > >> >>> >> >>> >>> > > ****************************************** > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > ------------------------------ > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Message: 2 > >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 16:29:52 -0700 > >> >>> >> >>> >>> > From: jjs - mainphrame <[email protected]> > >> >>> >> >>> >>> > To: Manny Marinho <[email protected]> > >> >>> >> >>> >>> > Cc: [email protected] > >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >>> >> >>> >>> > Message-ID: > >> >>> >> >>> >>> > > <CABkzw7xVWngB0zT7JAR5LQ2rd+bYxfGHSYNU5C1rWazHoXX=CA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> > >> >>> >> >>> >>> > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Does configtest.pl work? When you start maiad by > hand, are there any > >> >>> >> >>> >>> > errors? I think I've run maia on centos 6 in the past. > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Jake > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected]> > >> >>> >> >>> >>> > wrote: > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten this > to work with CentOS 6? > >> >>> >> >>> >>> > > I’ve tried to use the installer for CentOS 7 which > appears to work for the > >> >>> >> >>> >>> > > most part although my MTA is exim and I’m familiar > with the exim config > >> >>> >> >>> >>> > > part from using the original maia version. Seems the > issue that I’m seeing > >> >>> >> >>> >>> > > is the maia daemon won’t start or nothing happens > when you try to run it > >> >>> >> >>> >>> > > manually. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > -Manny > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] wrote: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World Wide > Web, visit > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > or, via email, send a message with subject or body > 'help' to > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > You can reach the person managing the list at > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > When replying, please edit your Subject line so it > is more specific > >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Today's Topics: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > ---------------------------------------------------------------------- > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Message: 1 > >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected]> > >> >>> >> >>> >>> > > > To: [email protected] > >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >>> >> >>> >>> > > > Message-ID: > >> >>> >> >>> >>> > > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected]> > >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Hi folks, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts all > work perfectly and > >> >>> >> >>> >>> > > > configtest.pl is fine. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and pear. The > pear modules are > >> >>> >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought I'd > check to see if anyone on > >> >>> >> >>> >>> > > > the list has had any luck with maia on suse leap > and php 7.x, or any > >> >>> >> >>> >>> > > words > >> >>> >> >>> >>> > > > of wisdom on that score - > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Cheers, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Jake > >> >>> >> >>> >>> > > > -------------- next part -------------- > >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > > > URL: < > >> >>> >> >>> >>> > > > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Subject: Digest Footer > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > _______________________________________________ > >> >>> >> >>> >>> > > > Maia-users mailing list > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >>> >> >>> >>> > > > ****************************************** > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > -------------- next part -------------- > >> >>> >> >>> >>> > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200408/615d172d/attachment-0001.html > > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > ------------------------------ > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Message: 3 > >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 23:07:42 -0400 > >> >>> >> >>> >>> > From: Ed <ed-9FOcALY/[email protected]> > >> >>> >> >>> >>> > To: [email protected] > >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >>> >> >>> >>> > Message-ID: < > e296fe44-de83-5e2c-3e78-6ca3dc6d6d62-9FOcALY/[email protected]> > >> >>> >> >>> >>> > Content-Type: text/plain; charset=utf-8; format=flowed > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > I've been running maia on centos6 for years and it > works just fine. > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > --Ed > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: > >> >>> >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? > When you start maiad by > >> >>> >> >>> >>> > > hand, are there any errors? I think I've run maia on > centos 6 in the past. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Jake > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> wrote: > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten > this to work with > >> >>> >> >>> >>> > > CentOS 6? I’ve tried to use the installer for > CentOS 7 which appears > >> >>> >> >>> >>> > > to work for the most part although my MTA is > exim and I’m familiar > >> >>> >> >>> >>> > > with the exim config part from using the > original maia version. > >> >>> >> >>> >>> > > Seems the issue that I’m seeing is the maia > daemon won’t start or > >> >>> >> >>> >>> > > nothing happens when you try to run it manually. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > -Manny > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > wrote: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >>> >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World > Wide Web, visit > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > or, via email, send a message with subject or > body 'help' to > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > You can reach the person managing the list at > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > When replying, please edit your Subject line > so it is more specific > >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Today's Topics: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ---------------------------------------------------------------------- > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Message: 1 > >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> > >> >>> >> >>> >>> > > > To: [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >>> >> >>> >>> > > > Message-ID: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> > >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Hi folks, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts > all work perfectly and > >> >>> >> >>> >>> > > > configtest.pl <http://configtest.pl> is fine. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and > pear. The pear modules are > >> >>> >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought > I'd check to see if > >> >>> >> >>> >>> > > anyone on > >> >>> >> >>> >>> > > > the list has had any luck with maia on suse > leap and php 7.x, or > >> >>> >> >>> >>> > > any words > >> >>> >> >>> >>> > > > of wisdom on that score - > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Cheers, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Jake > >> >>> >> >>> >>> > > > -------------- next part -------------- > >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > > > URL: > >> >>> >> >>> >>> > > < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Subject: Digest Footer > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > _______________________________________________ > >> >>> >> >>> >>> > > > Maia-users mailing list > >> >>> >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >>> >> >>> >>> > > > ****************************************** > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > ------------------------------ > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Message: 4 > >> >>> >> >>> >>> > Date: Thu, 9 Apr 2020 03:11:41 +0000 > >> >>> >> >>> >>> > From: Lawrence Mulder <lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected]> > >> >>> >> >>> >>> > To: Ed <ed-9FOcALY/[email protected]>, Maia-users_renaissoft.com > >> >>> >> >>> >>> > <[email protected]> > >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >>> >> >>> >>> > Message-ID: < > tbenk20b1iclu95a3oln4e0p.1586401899912-iL7gtBVyNKCGUxFv0Br65wC/[email protected]> > >> >>> >> >>> >>> > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Ed, > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > I was going to say the same thing, but I use version > 1.0.2c, I think? I assume he is trying to use the latest 1.0.4 stuff being > talked about on this list recently, but I'm not sure, LOL. I have never > tried the centos 7 / Debian latest maia on centos 6. > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Thanks, > >> >>> >> >>> >>> > -Larry > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > From: ed-9FOcALY/[email protected] > >> >>> >> >>> >>> > Sent: April 8, 2020 10:07 PM > >> >>> >> >>> >>> > To: [email protected] > >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > I've been running maia on centos6 for years and it > works just fine. > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > --Ed > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: > >> >>> >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? > When you start maiad by > >> >>> >> >>> >>> > > hand, are there any errors? I think I've run maia on > centos 6 in the past. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > Jake > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> wrote: > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten > this to work with > >> >>> >> >>> >>> > > CentOS 6? I’ve tried to use the installer for > CentOS 7 which appears > >> >>> >> >>> >>> > > to work for the most part although my MTA is > exim and I’m familiar > >> >>> >> >>> >>> > > with the exim config part from using the > original maia version. > >> >>> >> >>> >>> > > Seems the issue that I’m seeing is the maia > daemon won’t start or > >> >>> >> >>> >>> > > nothing happens when you try to run it manually. > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > -Manny > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > wrote: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >>> >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World > Wide Web, visit > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > or, via email, send a message with subject or > body 'help' to > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > You can reach the person managing the list at > >> >>> >> >>> >>> > > > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]> > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > When replying, please edit your Subject line > so it is more specific > >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Today's Topics: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ---------------------------------------------------------------------- > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Message: 1 > >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> > >> >>> >> >>> >>> > > > To: [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >>> >> >>> >>> > > > Message-ID: > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected] > >> >>> >> >>> >>> > > <mailto:[email protected]>> > >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Hi folks, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts > all work perfectly and > >> >>> >> >>> >>> > > > configtest.pl <http://configtest.pl> is fine. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and > pear. The pear modules are > >> >>> >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought > I'd check to see if > >> >>> >> >>> >>> > > anyone on > >> >>> >> >>> >>> > > > the list has had any luck with maia on suse > leap and php 7.x, or > >> >>> >> >>> >>> > > any words > >> >>> >> >>> >>> > > > of wisdom on that score - > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Cheers, > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Jake > >> >>> >> >>> >>> > > > -------------- next part -------------- > >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > > > URL: > >> >>> >> >>> >>> > > < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > Subject: Digest Footer > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > _______________________________________________ > >> >>> >> >>> >>> > > > Maia-users mailing list > >> >>> >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > ------------------------------ > >> >>> >> >>> >>> > > > > >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >>> >> >>> >>> > > > ****************************************** > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] <mailto: > [email protected]> > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > _______________________________________________ > >> >>> >> >>> >>> > > Maia-users mailing list > >> >>> >> >>> >>> > > [email protected] > >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > _______________________________________________ > >> >>> >> >>> >>> > Maia-users mailing list > >> >>> >> >>> >>> > [email protected] > >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > -------------- next part -------------- > >> >>> >> >>> >>> > An HTML attachment was scrubbed... > >> >>> >> >>> >>> > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200409/16d3e7df/attachment.html > > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > ------------------------------ > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > Subject: Digest Footer > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > _______________________________________________ > >> >>> >> >>> >>> > Maia-users mailing list > >> >>> >> >>> >>> > [email protected] > >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > ------------------------------ > >> >>> >> >>> >>> > > >> >>> >> >>> >>> > End of Maia-users Digest, Vol 171, Issue 3 > >> >>> >> >>> >>> > ****************************************** > >> >>> >> >>> >>> _______________________________________________ > >> >>> >> >>> >>> Maia-users mailing list > >> >>> >> >>> >>> [email protected] > >> >>> >> >>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >> > >> >>> >> >>> >> _______________________________________________ > >> >>> >> >>> >> Maia-users mailing list > >> >>> >> >>> >> [email protected] > >> >>> >> >>> >> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >>> >> >>> >> > >> >>> >> >>> >> > _______________________________________________ Maia-users mailing list [email protected] http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users